Waterway - Executive Euro Single-Speed Spa Pump, 2 / 2.2 / 3 kW – 2 kW - PF-20-1N22X

Waterway – Executive Euro Single-Speed Spa Pump, 2 / 2.2 / 3 kW – 2 kW

The Waterway Executive Euro is a single-speed hot tub pump used to run the massage jets, and it is fitted by many major spa brands. This replacement pump (for example PF-20-1N22X) is offered in three power ratings: 2 kW, 2.2 kW and 3 kW. It comes with an EMG Italian-made water-resistant motor and a high-performance wet end.

Power ratings and electrical data

Choose the rating that matches the pump you are replacing. The three versions draw the following current:

• 2 kW: 9 A
• 2.2 kW: 10.2 A
• 3 kW: 12.4 A

If you need to replace the capacitor, use 25 µF for the 2 HP version and 40 µF for the 3 HP version.

Connections and dimensions of the Executive Euro pump

The outflow is male threaded with a 78 mm outside diameter. The intake is also male threaded, with either a 78 mm or a 94 mm outside diameter. The pump is normally connected to 2-inch pipe.

• Length: 435 mm
• Width: 210 mm
• Height: 240 mm

If you need to refit the pipework, pump unions are available separately, such as the 78 mm pump union for 2″ pipe and the 94 mm pump union for 2″ pipe.

How to choose the right version

Several details need to match your existing pump: the power rating, the intake diameter (78 mm or 94 mm), the wet end orientation and the plug type. The manufacturer part numbers differ by power and intake size, for example PF-20-1N22X (2 kW, 78 mm) and PF-20-1N22X25 (2 kW, 94 mm). For 3 kW, the numbers PF-30-1N22X (78 mm) and PF-30-1N22X25 (94 mm) apply.

• Wet end orientation: standard exit, exit to left or exit to right
• Plug types: AMP, J&J or in.link

If you are unsure, contact us with the part number printed on your current pump.

Plugs and spare parts

Installations with a mini J&J plug should select the AMP plug option and use an adapter from AMP to mini J&J (sold separately). Alternatively, reuse the cable from your existing pump if it is in good condition.

Spare parts for the Waterway Executive Euro pump are available separately, including the impeller, the faceplate and the wet end seal.