Fonteyn

Fonteyn parts for Passion Spas hot tubs

Hot tubs ask a great deal of their smallest plastic components. The skimmer sits at the waterline, where it is hit by sunlight, splashing, sanitiser and the lid of the thermal cover being lifted on and off several times a week. The visible flap or cover on the front of that skimmer is usually the first part of the water management system to look tired, long before pumps, heaters or jets need attention. Here you will find the Fonteyn-supplied replacement for exactly that component, listed by part number so it can be matched against the parts diagram in your spa documentation.

What the range covers

The Fonteyn listing on this page is focused on the skimmer assembly of Passion Spas hot tubs, and specifically on the replaceable lid: Skimmer Lid for Passion Spas Hot Tubs – 150930. It is a cosmetic and functional cover rather than a structural part, which is why it is sold separately from the skimmer housing and filter basket behind it.

Because this is a single, clearly identified component, ordering is a matter of confirming the part number rather than working through a long catalogue. The number 150930 is the reference to quote and to check against the exploded view for your model, where skimmer components are normally grouped together with the filter housing, the basket and the weir.

Why skimmer lids need replacing

A skimmer lid does not wear out mechanically in the way a seal or a bearing does. It fails for simpler reasons, and recognising them early avoids water being drawn in unevenly or debris bypassing the basket.

• UV exposure: years of direct sunlight make moulded plastic chalky, faded or brittle, so the lid eventually cracks at a clip or corner.
• Chemical contact: undissolved granules or a strong shock dose sitting against the plastic can discolour or weaken the surface.
• Frost and handling: a lid that has become brittle often breaks when it is pressed back into place on a cold morning or knocked while the cover is being removed.
• Loss: lids are regularly lifted out to reach the filter and are easily mislaid, blown off the spa surround or dropped behind the cabinet.
• Appearance: on a spa that is otherwise in good order, a yellowed or chipped lid is the one part a guest actually notices.

Identifying and fitting the right lid

Skimmer covers differ between manufacturers and between generations of the same spa range, so a visual match is not enough on its own. Work through the following before ordering, and keep the old lid until the new one is in place so the two can be compared side by side.

• Model and build year: note the exact Passion Spas model name and, where available, the serial number from the plate on the cabinet or inside the equipment bay.
• Part number: check 150930 against the skimmer section of your manual or parts drawing, where components are usually given position numbers alongside their reference.
• Opening size: measure the width and height of the skimmer aperture in the acrylic shell, not the lid itself, as a broken lid can have lost material.
• Fixing method: look at how the existing cover is retained — clips, lugs or a slide-in groove — and confirm the replacement engages the same way.
• Orientation: note which way round the lid sits, as many designs are handed and only locate correctly in one direction.

Fitting is normally a tool-free job. Switch the spa off at the isolator if you intend to remove the filter at the same time, lift out the old lid, clear any debris or scale from the frame so the new cover seats flush, then press the replacement home until the clips locate. A lid that sits proud will usually be fouled by a cartridge that has not been pushed fully down or by grit in the groove.

Fonteyn at PoolParthub.com

Here we list Fonteyn components for Passion Spas hot tubs, supplied with the original part reference so owners and service engineers can order against the parts diagram instead of guessing from a photograph. The current listing covers the skimmer lid, part 150930, the item most often needed when a spa is cosmetically sound but the waterline cover has faded, cracked or gone missing.

Stocking parts by number rather than by description keeps replacements straightforward across a range of models and build years. If you are unsure whether this lid suits your spa, have the model name, serial number and the measurements of the skimmer opening to hand before ordering, and compare them with the parts list for your hot tub.