Ondilo - Spa in line ORP Redox Sensor Kit for Hot Tubs and Pools - PPS-10661
Ondilo – Spa in line ORP Redox Sensor Kit for Hot Tubs and Pools
The Ondilo Spa in line ORP / Redox sensor kit is a replacement sensor for the Ondilo Spa in line connected water analyser, used to monitor hot tub and pool water. It measures ORP (Oxidation-Reduction Potential), a close proxy for the amount of free chlorine or bromine in the water. The kit includes a buffer solution and a calibration and sensor replacement guide.
What the ORP sensor does
This Redox sensor is the part of the Spa in line analyser that reads the ORP value of your water. ORP gives a good indication of how much free chlorine or bromine is active, so the sensor is key to keeping an eye on your water treatment from your hot tub or pool.
It is a spare part only: it is intended for the Ondilo Spa in line system and is not a standalone water tester.
What is included in the kit
- 1 ORP Redox sensor
- 1 ORP 470 mV buffer solution (20 ml)
- 1 calibration and sensor replacement guide
If you also need to replace the pH probe, the Ondilo Spa in line pH sensor kit is available separately. A Ondilo Spa in line sensor calibration kit is also listed as a separate product.
Fitting the replacement sensor
Attach the sensor to the slot marked “ORP” on the manifold, following the instructions in the installation guide. Then connect the plug to the control box.
Calibration and maintenance
After the first season, recalibrate the sensors each time you restart your pool or spa, or every 6 months if you do not winterise. You should also recalibrate if you notice a drift in the measurements.
Documentation and support
The quick start guide and technical documentation can be downloaded below on this page.
For technical questions or after-sales service, contact Ondilo first via www.ondilo.com (select the “Assistance” tab) or by phone on +44 1490 340 188, Monday to Friday (non-surcharged landline number). Have your UUID ready before you call; you can find it in the settings section of your ICO application or inside your Spa in line box.
Additional information
| Weight: | 0,20 kg |
|---|---|
| Brand: | Ondilo |
| Product type: | ORP / Redox sensor kit |
| Compatible system: | Ondilo Spa in line |
| Measures: | ORP (Oxidation-Reduction Potential) |
| Buffer solution: | ORP 470 mV, 20 ml |
| Manifold slot: | ORP |
| Connection: | Plug to control box |
| Recalibration: | Each restart or every 6 months |
In details
- Replacement ORP sensor for the Ondilo Spa in line analyser
- Buffer solution (ORP 470 mV, 20 ml) included
- Calibration and sensor replacement guide included
- Suitable for hot tub and pool monitoring
- Only for the Ondilo Spa in line analyser
- pH sensor is sold separately