Poolex - Jetline Selection 30.50 kW Three-Phase Full Inverter Pool Heat Pump - PC-JLS310TN
Shipping On request
Certified online store
Easy returns within 14 days
Looking for advice?
Poolex – Jetline Selection 30.50 kW Three-Phase Full Inverter Pool Heat Pump
The Poolex Jetline Selection Fi PC-JLS310TN is a three-phase Full Inverter pool heat pump for pools up to 150 m³. It delivers 30.50 kW at A26 and 24.00 kW at A15, uses R32 refrigerant and is reversible, so it can heat or cool your pool water. The Jetline Selection line also comes in other sizes, including single-phase versions.
Key features of the Jetline Selection Fi heat pump
This model brings together the main features of the Poolex Jetline Selection Fi inverter heat pump in a high-output, three-phase version:
- R32 refrigerant gas
- Full Inverter technology, with variable compressor and fan speed
- Reversible operation for heating and cooling
- Poolex anti-freeze technology
- Automatic defrosting by cycle reversal
- Automatic thermostatic control
- Compatible with salt water treatment
How Full Inverter technology works
A Full Inverter pool heat pump adjusts the speed of both its compressor and its fan to match the heating demand. The compressor starts gradually. When the pool is far from the set temperature, the unit raises its output to heat the water quickly. Once the target is reached, it runs at reduced power to hold the temperature.
Because it avoids constant full-power running and frequent starts and stops, operation is steadier and quieter. According to the manufacturer, this saves more than 35% energy compared with an on/off pool heat pump.
The reversible mode lets you heat the water in spring and cool it during the hottest part of summer.
Performance and technical data
The PC-JLS310TN is built around a Mitsubishi compressor of the hermetic DC rotary inverter type. Its evaporator has a large hydrophilic aluminium surface, and the unit operates down to -7 °C.
- Heating capacity: 30.50 kW at A26 and 24.00 kW at A15
- Suitable for pool volumes up to 150 m³
- Operating range: -7 °C to 43 °C
- Power supply: three-phase 380/415 V
- Load losses: 1.1 mCE
Installation and connection
The casing is made of lightweight ABS, which makes the heat pump easier to handle and position. The water connection has a diameter of Ø50 mm (1″1/2). The electrical supply must be three-phase 380/415 V, so check this on site before ordering.
Which model to choose
This three-phase model suits large pools of up to 150 m³. The Jetline Selection Fi line is available in several other outputs for smaller volumes, so match the model to your pool size and your electrical supply.
Documentation
The product sheet and the Wi-Fi control documentation can be downloaded below on this product page.
Additional information
| Weight: | 114,0 kg |
|---|---|
| Dimensions: | 119,5 × 57,6 × 103,0 cm |
| Brand: | Poolex |
| Product line: | Jetline Selection Fi |
| Product type: | Full Inverter pool heat pump |
| Heating capacity A26: | 30.50 kW |
| Heating capacity A15: | 24.00 kW |
| Pool volume: | Up to 150 m³ |
| Refrigerant: | R32 |
| Power supply: | Three-phase 380/415 V |
| Compressor: | Mitsubishi hermetic DC rotary inverter |
| Operating range: | -7 °C to 43 °C |
| Load losses: | 1.1 mCE |
| Connection: | Ø50 mm (1"1/2) |
In details
- Full Inverter technology with variable compressor and fan speed
- 30.50 kW at A26 for pools up to 150 m³
- Reversible: heats and cools the pool water
- Operates down to -7 °C with automatic defrosting
- Compatible with salt water treatment
- Requires a three-phase 380/415 V power supply
- Only suitable for pools up to 150 m³
