Poolex - Jetline Selection 14.20 kW Full Inverter Pool Heat Pump - PC-JLS155N

Poolex – Jetline Selection 14.20 kW Full Inverter Pool Heat Pump

The Poolex Jetline Selection Full Inverter PC-JLS155N is a reversible R32 inverter heat pump for swimming pools of up to 80 m³. It delivers 14.20 kW at A26 and 10.00 kW at A15, and runs on a single-phase 230 V supply. A Mitsubishi DC rotary inverter compressor adjusts its output to the heating demand.

Key features

This pool heat pump is part of the Poolex Jetline Selection Fi line. It combines Full Inverter control with a reversible cycle, so it can heat the pool in spring and cool it during the hottest part of summer.

• R32 refrigerant gas
• Full Inverter technology: variable compressor and fan speed
• Reversible: heating and cooling
• Poolex antifreeze technology
• Automatic defrosting by cycle reversal
• Automatic thermostatic control
• Compatible with salt water treatment

How the Full Inverter heat pump works

The compressor starts gradually and the fan speed is adjusted along with it. When the water is far from the set temperature, the heat pump raises its output to warm the pool quickly. Once the set temperature is reached, it drops to a reduced output and holds it, avoiding frequent stops and starts.

Poolex states that this way of working saves more than 35% energy compared with an on/off pool heat pump. Running below full speed also keeps the sound level low.

The evaporator has a large hydrophilic aluminium surface, and the unit is designed to operate in air temperatures from -7 °C to 43 °C.

Performance and technical data

Key figures for the PC-JLS155N:

• Heating capacity: 14.20 kW at A26 and 10.00 kW at A15
• Suitable for pools up to 80 m³
• Power consumption at 15/26 °C: 2.37 kW
• COP at 15/26 °C: 4.6 (min) to 7.7 (max)
• COP at 26/26 °C: 6.1 (min) to 16.3 (max)
• Sound level at 10 m: 23 dB(A) (min) to 34 dB(A) (max)
• Compressor: Mitsubishi hermetic DC rotary inverter

Installation and connection

The unit connects to the pool circuit with a Ø50 mm (1½ inch) connection. The recommended water flow is 6 m³/h, and the load loss is 1.1 mCE.

It runs on a single-phase 230 V / 50 Hz supply. The ABS casing keeps the weight low, which makes the heat pump easier to handle and position next to the technical room.

Which model to choose

The Jetline Selection Fi line also comes in other power outputs for smaller and larger pools. The PC-JLS155N is the single-phase version for volumes up to 80 m³. A three-phase version of the same output exists as a separate model, so check your electrical supply before ordering.

Documentation

The Poolex product sheet and the WiFi control document can be downloaded below on this page.