Waterway - Standard Cluster Jet - Spa Replacement Jet – Textured grey - 215-9837

Waterway – Standard Cluster Jet – Spa Replacement Jet – Textured grey

The Waterway standard cluster jet is a replacement hot tub jet, supplied here as the smooth white 215-9840 and in three other finishes. It screws directly into its socket with an 11 mm Allen key, so no special tools are needed.

The versions differ only in finish: smooth white, smooth grey, textured grey or stainless steel, each with its own Waterway part number.

Choosing the right Waterway cluster jet version

Select the finish that matches the jets already in your spa. Each Waterway version has its own part number:

• Smooth white: 215-9840
• Smooth grey: 215-9847
• Textured grey: 215-9837
• Stainless steel: 212-9897S

A stainless steel jet with a large face also exists under part number 212-9901S. It is listed for reference and is not one of the options on this page.

Fitting and dimensions

This is a fairly simple jet to fit. It screws straight into its socket and is tightened with an 11 mm Allen key. Check these dimensions against your existing jet before ordering:

• Drill diameter: 25 mm
• Length: 30-31 mm
• Outside diameter of the jet face: 52 mm (standard) or 62 mm (large facet)

Replace the gasket and seal the threads

It is usually a good idea to replace the corresponding gasket at the same time as the jet.

To help ensure a complete seal, use neutral silicone, without aggressive solvents, on the wall fitting and on the threads.

Part numbers and cross references

When searching for a replacement, look for the Waterway numbers 215-9840, 215-9847, 215-9837, 212-9897S or 212-9901S.

The following Sunrise Spas numbers are also listed for this jet family: R3045249, R3035412 and R3035413.