SINED - Arborea Outdoor Wall Shower with Hand Shower, Stainless Steel - DOCCIA-ARBOREA-INOX
Shipping 1-2 weeks
Certified online store
Easy returns within 14 days
Looking for advice?
SINED – Arborea Outdoor Wall Shower with Hand Shower, Stainless Steel
The SINED Arborea is a wall-mounted outdoor shower in 316L stainless steel, fixed to the wall at three points. It suits places with little room for a floor-standing pool shower or garden shower, and it can also be used indoors. Hot and cold water inlets feed a single mixer that serves both the overhead shower and the hand shower.
Key features
- Wall-mounted outdoor shower with a fixing system at 3 points
- Double hot and cold water inlet
- Mixer with a progressive 3-way cartridge and built-in diverter
- Overhead shower and movable hand shower
- Anti-limescale nozzles
- Concealed water connections
The mixer sets jet intensity, hot and cold temperature and the direction of the water, so the temperature can be controlled for both the overhead and the hand shower.
Materials and finish
The shaft has a 60 mm diameter and is made of 316L stainless steel, also called marine steel, in a stainless steel finish. The tapware and accessories are also 316L stainless steel, while the hand shower hose is AISI 304 stainless steel. The low carbon content of 316L gives good resistance to corrosion, including pitting, which makes the shower suitable for saline environments such as the coast.
Water connection and installation
The shower needs a hot and a cold water supply. The hot water connection is on the left side. The horizontal section is non-reversible, so the shower can only be mounted on the right-hand side. Before connecting the pipes, flush the system to keep dirt out of the shower. A filter at the water inlets helps to prevent limescale. If the shower is installed outdoors, turn off the water and drain it completely before winter or after long periods of non-use. It can also be dismantled and stored, or protected with a suitable cover.
What is included
The shower comes with a protective bag. The overall weight is 8 kg.
Maintenance and documentation
Clean the surface with a damp cloth and neutral soap, then rinse and dry it. Do not use abrasive detergents or products containing alcohol, hydrochloric acid or phosphoric acid. Clean the nozzles and shower head from time to time. The product sheet can be downloaded below.
SINED - Wall-Mounted Water Connector, Brass and 316L Stainless Steel - CONNETTORE-MURALE-ACQUA
€19,00
SINED - Progressive Mixer Cartridge for Stainless Steel Showers - CARTUCCIA-MIXER-PROGRESSIVA
€39,00
SINED - Flexible Hose for Outdoor Showers, Stainless Steel - TUBO-FLESSIBILE-LEVANTE-INOX
€39,00
SINED - Levante Hand Shower, Stainless Steel - DOCCINO-LEVANTE-INOX
€39,00
Additional information
| Weight: | 9 kg |
|---|---|
| Dimensions: | 18 × 62 × 102 cm |
| Brand: | SINED |
| Product type: | Outdoor wall shower |
| Material: | 316L stainless steel |
| Finish: | Stainless steel |
| Water supply: | Hot and cold |
| Mixer: | Progressive 3-way cartridge |
| Shaft diameter: | 60 mm |
| Height: | 120 cm |
| Weight: | 8 kg |
| Mounting: | Wall, 3 fixing points |
| Included: | Protective bag |
| EAN: | 8025431018600 |
In details
- Made of 316L stainless steel, suited to saline environments
- Wall-mounted with 3 fixing points, saving floor space
- One mixer controls temperature for overhead and hand shower
- Anti-limescale nozzles
- Can be used outdoors and indoors
- Right-side mounting only, as the horizontal section is non-reversible
- Outdoors it must be drained or dismantled before winter
