Norsup Automatic Dosing System V2 exploded view & spare parts
Spare parts list
Norsup - Automatic Dosing System V2 External Pump Unit - 7032161
€322,45
Norsup - Power Supply Connection for Automatic Dosing System V2 - 7032162
€322,45
Norsup - SMPS to Power Board Cable for Automatic Dosing System V2 - 7038521
€68,45
Norsup - Dosing System Control Board with Display (V2) - 7032163
€1.116,95
Norsup - Connection Board for Automatic Dosing System V2 - 7032164
€245,95
Norsup - Dosing System Wall Bracket with Mounting Screw - 7032165
€57,95
Description
Norsup Automatic Dosing System V2 exploded view & spare parts
This page provides the complete exploded-view diagram and bill of materials for the Norsup Automatic Dosing System V2, sold under factory reference 7030958. The Norsup automatic dosing system is designed for private pools up to 100 m³, automatically dosing chlorine and regulating pH. The unit ships as a plug-and-play kit that includes pH and ORP probes, with a user-friendly LCD interface displaying water temperature, pH and chlorine levels. Whether you are a pool owner replacing a worn peristaltic pump component or a technician tracing an internal wiring fault, the numbered diagram on this page will help you identify the exact part you need in minutes.
How to use the numbered diagram to find your part
Every numbered call-out in the diagram corresponds directly to a row in the parts list below it — locate the area of the unit that concerns you, note the position number printed next to the arrow, then find that same number in the left-hand column of the table. The SKU shown in that row is the reference you add to your basket. Work from the outside of the unit inward: external hydraulic accessories carry lower position numbers, while internal electronics sit at higher ones. Bear in mind that some position numbers reappear in more than one location on the diagram — this is common for shared fasteners, cable ties and generic connectors, so always check the written description alongside the number to confirm you have the right component. Position 16 in this diagram is particularly dense: it covers the keyboard, cable and connector kits, fuse set, sensors and the full suite of hydraulic accessories, all sharing the same position reference but distinguished by lettered sub-variants (a, c, d, e, f, g, h, i, j, k, l, m, n, o, p, q). Always read the letter suffix carefully before ordering. Finally, note that some positions — including position 8 (flat HE-10 cable), position 13 and positions 14 and 15 (external connectors) — do not currently carry a poolparthub SKU, meaning they are not available individually; if you need one of these parts, please contact us before ordering.
Main replaceable assemblies on the Norsup Automatic Dosing System V2
The V2 dosing unit is built around two core electronic boards. Position 9 (SKU 7032163, factory ref CART006136-PE088) is the control board — the brain of the system that interprets probe signals and drives the dosing pumps. Position 10 (SKU 7032164, CART006137) is the connection board, which routes signals between the control board and all external wiring looms. Power reaches those boards via two distinct supply paths: position 2 (SKU 7032162, ACCE005057-PDC) handles the mains power supply connection at the enclosure entry point, while position 6 (SKU 7038521, CABL005040-PDC) is the internal SMPS-to-power-board cable that carries regulated DC from the switched-mode supply to the boards. On the hydraulic side, position 1 (SKU 7032161, ACCE005042-PDC) is the external pumping part — the peristaltic pump head assembly that physically draws chemical from the dosing containers — and is one of the most frequently replaced wear items on any dosing system. Mounting and installation are served by position 21 (SKU 7032165, SENS008041-PDC), the wall support with fixing screw, which secures the entire unit to a plant-room wall. The accessory sub-group within position 16 extends the system into the pipework: items such as the suction strainer (16a), injection connector (16c), probe holder (16d) and saddle clamps (16i) form the hydraulic interface between the dosing unit and your pool’s return line, while the pH probe (16j, SKU 7028034) and Gold ORP probe (16q, SKU 7028035) are the measurement sensors that the control board relies upon for accurate, continuous water-quality readings.
Choosing between variants and pack sizes
Position 16 uses alphabetical suffixes to separate components that are physically similar but not interchangeable. For example, the blanking caps differ by thread size: 16e (SKU 7032179) is a Cap ؽ” and 16f (SKU 7032180) is a Cap ؾ”, while 16g (SKU 7032181) is a female cap in ½” — fitting the wrong cap can result in a leak or an inability to seat the fitting correctly, so always verify your existing thread before ordering. Cable and connector kits also come as matched pairs for a specific probe type: KIT07CABPHGEN-PDC (SKU 7032166) is the cable and connector kit for the pH Genesis probe, whereas KIT07CABORPGEN-PDC (SKU 7032167) covers the ORP Genesis probe — these are not cross-compatible. The fuse at position 16 (PROT002013-PDC, SKU 7032168) is supplied as a set of five T6.3 A fuses, which is the factory pack size; there is no single-fuse option listed in this BOM. When ordering pump hose (16k, SKU 7032183) or the roller holder (16l, SKU 7032184), also consider ordering the pH pump maintenance kit (16m, SKU 7032185) at the same time, as it bundles the consumable wear parts most commonly replaced together during a service interval.