Sistema de dosagem automática Norsup V2: vista explodida e peças sobressalentes
Lista de peças sobressalentes
Norsup - Automatic Dosing System V2 External Pump Unit - 7032161
€322,45
Norsup - Power Supply Connection for Automatic Dosing System V2 - 7032162
€322,45
Norsup - Cabo de ligação entre a fonte de alimentação SMPS e a placa de alimentação para o sistema de dosagem automática V2 - 7038521
€68,45
Norsup - Placa de controlo do sistema de dosagem com ecrã (V2) - 7032163
€1.116,95
Norsup - Placa de ligação para o sistema de dosagem automática V2 - 7032164
€245,95
Norsup - Suporte de parede para sistema de dosagem com parafuso de fixação - 7032165
€57,95
Descrição
Sistema de dosagem automática Norsup V2: vista explodida e peças sobressalentes
Esta página fornece o diagrama de vista explodida completo e a lista de materiais para o Sistema de dosagem automática Norsup V2, vendido sob a referência de fábrica 7030958. O sistema de doseamento automático Norsup foi concebido para piscinas privadas até 100 m³, doseando automaticamente cloro e regulando o pH. A unidade é fornecida como um kit pronto a usar que inclui sondas de pH e ORP, com uma interface LCD de fácil utilização que apresenta a temperatura da água, o pH e os níveis de cloro. Quer seja um proprietário de piscina a substituir um componente desgastado da bomba peristáltica ou um técnico a localizar uma avaria na cablagem interna, o diagrama numerado desta página ajudá-lo-á a identificar a peça exata de que necessita em minutos.
Como utilizar o esquema numerado para encontrar a sua peça
Every numbered call-out in the diagram corresponds directly to a row in the parts list below it — locate the area of the unit that concerns you, note the position number printed next to the arrow, then find that same number in the left-hand column of the table. The SKU shown in that row is the reference you add to your basket. Work from the outside of the unit inward: external hydraulic accessories carry lower position numbers, while internal electronics sit at higher ones. Bear in mind that some position numbers reappear in more than one location on the diagram — this is common for shared fasteners, cable ties and generic connectors, so always check the written description alongside the number to confirm you have the right component. Position 16 in this diagram is particularly dense: it covers the keyboard, cable and connector kits, fuse set, sensors and the full suite of hydraulic accessories, all sharing the same position reference but distinguished by lettered sub-variants (a, c, d, e, f, g, h, i, j, k, l, m, n, o, p, q). Always read the letter suffix carefully before ordering. Finally, note that some positions — including position 8 (flat HE-10 cable), position 13 and positions 14 and 15 (external connectors) — do not currently carry a poolparthub SKU, meaning they are not available individually; if you need one of these parts, please contact us before ordering.
Principais conjuntos substituíveis no Sistema de Dosagem Automática Norsup V2
A unidade doseadora V2 é construída em torno de duas placas eletrónicas principais. Posição 9 (SKU 7032163, ref. de fábrica CART006136-PE088) é o placa de controlo — o cérebro do sistema que interpreta os sinais das sondas e aciona as bombas doseadoras. Posição 10 (SKU 7032164, CART006137) é o connection board, which routes signals between the control board and all external wiring looms. Power reaches those boards via two distinct supply paths: posição 2 (SKU 7032162, ACCE005057-PDC) gere a alimentação elétrica ligação de alimentação no ponto de entrada do invólucro, enquanto posição 6 (SKU 7038521, CABL005040-PDC) é o interno Cabo de ligação entre a fonte de alimentação SMPS e a placa de alimentação que transporta CC regulada da fonte de comutação para as placas. No lado hidráulico, posição 1 (SKU 7032161, ACCE005042-PDC) é o peça de bombagem externa — the peristaltic pump head assembly that physically draws chemical from the dosing containers — and is one of the most frequently replaced wear items on any dosing system. Mounting and installation are served by position 21 (SKU 7032165, SENS008041-PDC), o suporte de parede com parafuso de fixação, which secures the entire unit to a plant-room wall. The accessory sub-group within position 16 extends the system into the pipework: items such as the suction strainer (16a), injection connector (16c), probe holder (16d) and saddle clamps (16i) form the hydraulic interface between the dosing unit and your pool’s return line, while the pH probe (16j, SKU 7028034) and Gold ORP probe (16q, SKU 7028035) are the measurement sensors that the control board relies upon for accurate, continuous water-quality readings.
Escolher entre variantes e tamanhos de embalagem
Position 16 uses alphabetical suffixes to separate components that are physically similar but not interchangeable. For example, the blanking caps differ by thread size: 16e (SKU 7032179) é uma Tampa ؽ” e 16f (SKU 7032180) é uma Tampa ؾ”, enquanto 16g (SKU 7032181) is a female cap in ½” — fitting the wrong cap can result in a leak or an inability to seat the fitting correctly, so always verify your existing thread before ordering. Cable and connector kits also come as matched pairs for a specific probe type: KIT07CABPHGEN-PDC (SKU 7032166) é o kit de cabo e conector para a sonda pH Genesis, enquanto KIT07CABORPGEN-PDC (SKU 7032167) covers the ORP Genesis probe — these are not cross-compatible. The fuse at position 16 (PROT002013-PDC, SKU 7032168) is supplied as a conjunto de cinco fusíveis T6.3 A, which is the factory pack size; there is no single-fuse option listed in this BOM. When ordering pump hose (16k, SKU 7032183) or the roller holder (16l, SKU 7032184), also consider ordering the pH pump maintenance kit (16m, SKU 7032185) at the same time, as it bundles the consumable wear parts most commonly replaced together during a service interval.