Maytronics Dolphin M400 IoT – Cabo flutuante de 18 m com articulação giratória – 9995873-DIY

Maytronics Dolphin M400 IoT 18m floating cable with swivel

This is the genuine Maytronics replacement 18-metre floating cable with integrated swivel for Dolphin robotic pool cleaners that use Bluetooth or remote-control communication. Carrying power and control signals between the power supply unit and the robot via a 3-wire configuration, the cable is purpose-built to float at the water surface, reducing drag and allowing the cleaner to navigate freely across the pool floor, walls and waterline.

How the swivel system works

The patented Dolphin swivel mechanism sits in line with the cable and rotates freely as the robot changes direction, preventing the cable from twisting or knotting during operation. A tangled or kinked cable restricts the robot’s range of motion, causes uneven pool coverage and places mechanical stress on the connector points — the swivel eliminates all three failure modes in a single component.

Modelos Dolphin compatíveis

This cable is the factory-specified part for Dolphin robots with 3-pin Bluetooth or remote-control connectivity, including the Dolphin M400 IoT, M400 (Bluetooth version), M500, Supreme M4 Pro (Bluetooth), Supreme M5 / M5 Pro, Explorer Plus, Pulit E80, Pulit E90, Zenit 20 (Bluetooth), Zenit 30, F60, SF60, Kaptur 400, Kaptur 500 and Bio. Verify your exact model’s communication type before ordering — this cable requires a 3-pin Amphenol-type motor connector.

Signs that the cable needs replacing

Replace the floating cable when you observe persistent kinking that the swivel cannot correct, visible cracking or splitting of the PVC jacket, corroded or bent connector pins, intermittent loss of power to the robot, or an error code on the power supply unit that clears when the cable is repositioned. Continuing to run the robot on a damaged cable risks water ingress into the motor and power-supply circuits.

Why genuine Maytronics matters

The DIY-spec cable ships complete with the Amphenol plug, triangle motor connector, cable supports and all hardware required for a straightforward self-installation — no soldering or specialist tools needed. The PVC outer jacket and copper conductors are formulated to resist pool chemicals, UV exposure and continuous immersion. Only genuine Maytronics parts guarantee the dimensional and electrical tolerances required to maintain your robot’s warranty and long-term reliability.