Maytronics Dolphin Explorer Ex 45 CB handle assembly - 99957084-ASSY

Maytronics Dolphin Explorer Ex 45 CB handle assembly

This is the genuine Maytronics replacement handle assembly for the Dolphin Explorer Ex 45 CB robotic pool cleaner. The handle is the moulded grip structure mounted on the top of the robot’s body, used to lift and carry the unit safely when removing it from the pool at the end of a cleaning cycle. Supplied as a complete assembly (ASSY), it includes all sub-components required for a direct, like-for-like swap.

Function and importance

The handle is the primary contact point between the operator and the robot during retrieval. Every time the Ex 45 CB is lifted out of the water it bears the robot’s full wet weight — approximately 10 kg — so a structurally sound handle is essential for operator safety and for protecting the unit from accidental drops. A cracked, snapped or loose handle should be replaced immediately before the next pool retrieval.

Signs that the handle needs replacing

Replace this assembly if you notice any visible cracks, fractures or stress-whitening in the plastic; if the handle feels loose or rocks on its mounting points; if any retaining clip or pivot pin has sheared; or if the grip surface has become rough or sharp-edged. Continuing to use a compromised handle risks dropping the robot onto hard pool surrounds, causing further damage to the casing, motor unit or brushes.

Compatibility

This assembly is the OEM handle for the Maytronics Dolphin Explorer Ex 45 CB. Always verify against your robot’s model label before ordering, as the Explorer range encompasses several variants and handle geometry can differ between generations.

Why genuine Maytronics parts matter

Aftermarket handles are often moulded in lower-grade plastics that become brittle after repeated UV and chlorine exposure. A genuine Maytronics part is manufactured to the same tolerances as the original, ensuring the mounting points align precisely, the retaining clips engage correctly, and the assembly carries the rated load without flexing. Using genuine parts also preserves any remaining warranty on the robot.