LX Pump Co. - LP/JA Pump Motor Fan Cover 158 mm - PPS-10113

LX Pump Co. – LP/JA Pump Motor Fan Cover 158 mm

This 158 mm fan cover is a replacement spare part for the motor end of LX Whirlpool spa pumps. It fits the LP200, LP250, LP300, JA200 and TDA200 pump motors. Unlike the fan wheel, which is a separate part, this is the outer cover only.

Compatible LX Whirlpool pump motors

This hot tub pump fan cover is listed as a spare part for the following LX Whirlpool pump motors:

• LP200
• LP250
• LP300
• JA200
• TDA200

It covers both the LP series and the JA and TDA models, so one cover size serves all five motors listed above.

Fan cover dimensions

Check the measurements below against the cover on your pump before ordering:

• Outside diameter: 158 mm
• Inside diameter: 155 mm
• Height: 73 mm

The outside diameter of 158 mm is the figure used in the product designation, so it is the quickest value to compare with your old cover.

How to choose the right fan cover

Start with the model name of your pump motor. If it reads LP200, LP250, LP300, JA200 or TDA200, this LX Whirlpool fan cover is the part intended for it.

If your pump is a different model or a different brand, do not assume the cover will fit. Compare the model designation and the dimensions above with your existing cover first.

Fan wheel sold separately

The cover is supplied on its own. If the fan inside the motor end also needs replacing, the fan wheel is available separately. Please note that the fan wheel is only for LP series pumps, so it does not apply to the JA200 or TDA200.

Order the cover and the fan wheel together only if both are worn or damaged on your LP pump.