HydroAir - Short Wall Fitting for HydroAir Suctions, Skimmers and Jets – Beige - PPS-10363
Shipping 1-3 weeks
Certified online store
Easy returns within 14 days
Looking for advice?
HydroAir – Short Wall Fitting for HydroAir Suctions, Skimmers and Jets – Beige
The Balboa HydroAir short wall fitting, part number 10-3801 (also listed as 30-3801), is a replacement component used in many HydroAir suction, skimmer and jet fittings for thin-walled spas. It is the short version of the fitting: if your spa has thicker walls, including a wooden spa, you need the longer version instead.
Compatibility of the HydroAir wall fitting 10-3801
This spa wall fitting is a component of many HydroAir fittings, including suctions, skimmers and jets. It is designed for thin-walled spas.
Spas with thicker walls, including wooden spas, need the longer version of the fitting. Check your wall thickness before you order a replacement.
What you can connect to the wall fitting
A different part can be connected on each end of the fitting.
On the inside of the spa you can:
- screw in a suction cover
- attach a vertical skimmer grille
- use it as a component of the Balboa HydroAir Eyeball jet
On the outside of the spa you can:
- fix it in place with a simple nut
- glue it directly to 1.5-inch pipe
- screw it into a straight (1.5-inch / 50 mm) or elbowed (1.5-inch / 50 mm) connector
How to choose the right fitting
Before ordering, check the following points:
- Short or long: this short fitting suits thin-walled spas, while thicker walls and wooden spas call for the longer version.
- Part number: this page covers the HydroAir fitting listed as 10-3801 or 30-3801.
- Colour: the fitting is available in White and Beige. Choose the colour that matches the other fittings in your spa.
Fitting and dimensions
Install the wall fitting with a gasket and also apply silicone between the wall fitting and the interior wall of the spa.
- Drill diameter (outside of thread): 60 mm
- External diameter of the face: 85 mm
- Inside diameter of the face: 45 mm
- Inside diameter of the connection: 48 mm, for 1.5-inch pipe
- Total length: 40 mm
Additional information
| Weight: | 0,30 kg |
|---|---|
| Brand: | Balboa HydroAir |
| Product type: | Short wall fitting |
| Colours: | White, Beige |
| Drill diameter: | 60 mm |
| Face outer diameter: | 85 mm |
| Face inner diameter: | 45 mm |
| Connection: | 48 mm, for 1.5-inch pipe |
| Total length: | 40 mm |
| Colour: | Beige |
| Part number: | PPS-10363 |
In details
- Used in many HydroAir suction, skimmer and jet fittings
- Different parts can be connected on each end
- Can be glued to 1.5-inch pipe or screwed into a 50 mm connector
- Available in White and Beige
- Short version only suitable for thin-walled spas
- Gasket, nut and silicone are needed for fitting and are not part of the fitting itself
