CMP - 3" SQR Jet Grommet in Grey for CMP SQR Sockets - 29232-299-040

CMP – 3″ SQR Jet Grommet in Grey for CMP SQR Sockets

The CMP 3″ SQR jet grommet, part number 29232-299-040, is a grey replacement gasket made for CMP 3″ sockets fitted with the SQR system. Unlike a traditional hot tub jet fitting, the SQR system needs no fixing nut, screw thread or separate gasket, because this grommet holds and seals the socket by itself. Check that your jets use the SQR system before ordering this spa jet grommet.

Compatibility with CMP 3″ SQR sockets

This grommet is designed specifically for CMP 3″ sockets with the SQR system. It is a gasket for that type of socket only, so it is not the right replacement if your jets are the traditional type that use a nut and a separate gasket.

Before you order, confirm that your jets are CMP 3″ SQR sockets and compare the part number 29232-299-040 with your needs.

How the SQR grommet seals the socket

With the SQR system, the grommet locks the socket in place and seals it by radial force. That is why a fixing nut, screw thread and gasket are not needed.

The difference from traditional jets is how the seal is made:

• SQR system: the grommet locks and seals the socket by radial force.
• Traditional jets: a nut, a gasket and a comp ring seal by compression.

Because the grommet carries out both jobs, it is the part to replace when the seal of an SQR socket is worn or damaged.

Dimensions and colour

The grommet is grey and has the following dimensions:

• Maximum diameter: 70 mm
• Thickness: 16 mm

Compare these measurements with your existing grommet if you want to be sure of the match.

What is included and what is sold separately

This listing is for the grey 3″ SQR jet grommet only. The jet body is a separate part, for example the CMP Pro-Loc 300 SQR jet body, and is not part of this item.

When searching for a replacement, quote the CMP part number 29232-299-040 to find the correct grommet quickly.