Balboa - BP2100 G1 Expansion Kit with Two Cables - PPS-10107

Balboa – BP2100 G1 Expansion Kit with Two Cables

The Balboa 30893 expansion kit is a set of two cables for the Balboa BP2100G1 control system. It is the kit you need if you want the spa control system to run three massage pumps and a blower. Fit it as a replacement or upgrade accessory when the standard wiring cannot cover that many pumps.

Compatibility: Balboa 30893 for BP2100G1 systems

This kit is intended for spas with the BP2100G1 control system (also written BP2100 G1). Its purpose is to extend the system so that it can manage three massage pumps and a blower.

If you are not sure whether your spa pack is a BP2100G1, check the model details on the control system before ordering. If you are still unsure, contact us with the part number printed on your current equipment and we will help you check.

What the two cables do

The two cables each have a separate job:

• The cable on the left of the product photo includes a fuse holder for the blower. The holder takes a 10A fuse.
• The cable on the right of the photo is a splitter cable. It lets you install two single-speed pumps in place of one two-speed pump.

Together they give the BP2100G1 the extra connections needed for a three-pump and blower layout.

What is included and what is sold separately

The kit consists of two cables under Balboa part number 30893. A splitter cable is also available separately, so you can order it on its own if you only need that part.

Because the blower cable has a fuse holder for a 10A fuse, make sure you have a suitable fuse to hand before you start the installation.

Choosing the right part

Use this kit only when you want to add capacity to a BP2100G1 system. It is not a general-purpose cable and is not a pump or blower itself, so check that your spa layout matches the three-pump and blower arrangement described above.

Quote part number 30893 when you compare it with other expansion cables, so you are sure you are ordering the right Balboa item for your spa.