AstralPool - Neolysis Connect LS 24 + UV 56W Salt Chlorinator – 24 g/h - 76754

AstralPool – Neolysis Connect LS 24 + UV 56W Salt Chlorinator – 24 g/h

The Neolysis Connect LS 24 + UV 56W is a hybrid UV and salt electrolysis unit that produces 24 g/h of chlorine for pools up to 100 m³. It runs on 230 V – 50/60 Hz at a low salt level of 1 g/L (1.0 – 5.0 g/L), draws 0.72 A and has 2’’ female thread connections.

How hybrid UV and salt disinfection works

The Neolysis Connect LS range combines UV treatment with salt water electrolysis. The system has three elements: an electrolysis cell, a UV chamber and a control unit.

Once salt is dissolved in the pool water, an electric current passes through the titanium electrodes in the cell and free chlorine is produced. The UV chamber adds UVC disinfection to the chlorine made by electrolysis. Chlorine is produced while the pool’s recirculation system, pump and filter, is running.

The LS versions are designed for low-salinity operation, which suits bathers who prefer a lower salt level. The electrodes are cleaned automatically to prevent incrustations forming on them.

Control and connectivity

The control unit has an Oled touchscreen for setting production and checking pool information. Built-in Wi-Fi connectivity lets you view pool information remotely through the companion app.

Four output relays manage pool equipment such as the filtration pump and lighting. A flow detector kit is included, and built-in timers allow programming of the pool functions.

PH and ORP control options

For a more complete water treatment, the range can be extended with optional S-Driver modules for pH and ORP (redox) control. The exact module codes for each model are listed in its specification.

• pH control needs a peristaltic pump module for dosing
• Optional modules are also available for free chlorine control and variable-speed pump control
• An optional Relay Box kit simplifies connection of pool equipment

Installation

Installation, electrical connection and maintenance must be carried out by a qualified installer who has read the full installation instructions. Local standards for accident prevention and electrical installations must be observed.

Install the unit upright on a rigid surface in a dry, ventilated area, ideally protected from the weather. It must not be installed in areas at risk of flooding or near flammable materials. The unit needs an earth connection, an RCD supply and a disconnection switch within easy reach. It is intended for permanent connection to the water supply. The system operates at 230 V – 50/60 Hz, with a working temperature of 15 – 40°C max and a maximum pressure of 3 Kg/cm².

The casing is polyethylene and is 100% corrosion-resistant.

Maintenance

The cell alarm appears when the electrodes reach the end of their life, estimated at 10 000 h – 12 000 h. The UV lamp life is 13 000 h. Disconnect the power supply and make sure no water is flowing before replacing any component, and use only genuine replacement parts.

Handle the UV lamp only when it is completely cold and wear gloves, as grease on the lamp can reduce its performance and life. Never look directly at the lamp when it is on. Never remove the retaining nut of the quartz tube while water is circulating in the reactor. Keep the pool water balanced throughout the season.