AstralPool - E-Next 40 Salt Chlorinator – 40 g/h - 74085
Shipping 1-3 weeks
Certified online store
Easy returns within 14 days
Looking for advice?
AstralPool – E-Next 40 Salt Chlorinator – 40 g/h
The AstralPool E-Next 40 is a salt chlorinator that produces 40 g/h of chlorine for pools up to 180 m³. It runs from a 230 V / 50/60 Hz supply and draws 0.9 A.
How the E-Next works
The E-Next disinfects the pool automatically using salt water chlorination. Salt is dissolved in the pool water, and this salty water then passes through the electrolysis cell. Inside the cell, a weak electrical current passes through titanium electrodes and free chlorine is produced.
The chlorinator produces chlorine whenever the pool circulation system (pump and filter) is running. The electrodes are self-cleaning, and polarity reversal every 2 – 3 h helps keep them clean and avoids scale forming on them.
Controls and alarms
A chlorine output switch lets you select the production level, and an operating LED shows the setting. A low salt LED and a salt alarm indicator warn you when the salt concentration is too low, which helps protect the cell and prevents the pool turning green.
Flow detection (gas) stops the unit if there is no water flow. If the pool has an automatic cover, the pool cover mode (special dry contact) reduces chlorine production to 10% while the cover is closed.
Installation and electrical connection
Installation and electrical connection must be carried out by a qualified installer, following current electrical and accident prevention regulations. The cell is installed on a by-pass in the pipework after the filter, with a glued PVC connection. The power pack is connected to the switchboard.
- Power supply: 230 V – 50/60 Hz only. Do not alter the unit to run on another voltage.
- The unit must be earthed and fed from a residual current device.
- An omnipolar disconnector switch is required for the electrical connection.
- Install it in a well-ventilated place, away from flammable materials and never where flooding is possible.
Construction and operating limits
The cell body is made of a methacrylate derivative and the power pack enclosure is ABS. The cell works at water temperatures of 15-40°C max, and its maximum pressure is 1 Kg/cm².
The pool volumes given for each model apply under the stated conditions of filtration time and water temperature. They are lower when the water is warmer.
Care and maintenance
Before installing or replacing any component, disconnect the equipment from the mains. Use only spare parts supplied by the manufacturer. If the power cable is damaged, it must be replaced by the manufacturer, its after-sales service or similarly qualified personnel.
Read the instruction manual before installation and start-up, and keep it for future reference. It covers cell maintenance, alarms and troubleshooting.
Additional information
| Brand: | AstralPool |
|---|---|
| Chlorine production (g/h): | 40 g/h |
| Max. pool volume: | 180 m³ |
| Power supply: | 230 V / 50/60 Hz |
| Power consumption: | 0.9 A |
| Reference: | 74085 |
In details
- Automatic salt water chlorination with self-cleaning electrodes
- Polarity reversal every 2 - 3 h helps keep the electrodes clean
- Salt alarm indicator and flow detection (gas) as built-in safety features
- Pool cover mode reduces production to 10% when an automatic cover is fitted
- Five models to match different pool volumes
- Installation and electrical connection must be carried out by a qualified installer
- Treated pool volume is lower when the water is warmer, and the cell works at 15-40°C max
