Waterway - Spa Diverter Valve Cap for Marquis Spas Since 2003 - 350-6292

Waterway – Spa Diverter Valve Cap for Marquis Spas Since 2003

The Waterway 350-6292 diverter valve cap is a replacement cover for certain diverter valves fitted to Marquis Spas hot tubs marketed since 2003. It is a small spare part, so it is worth checking the measurements below before you order.

Compatibility with Marquis Spas diverter valves

This spa diverter valve cap is a spare part for certain diverter valves found on Marquis Spas models marketed since 2003. The wording “certain diverter valves” matters: not every valve on every spa will take this cover, so please compare your existing cap with the dimensions on this page.

The part is made by Waterway and carries the Waterway part number 350-6292. Use that number when you search or when you compare it with markings on your current part.

Dimensions and fitting

Measure your old cap before ordering. The dimensions of this replacement are:

• Outside diameter: 101 mm
• Inner mounting diameter: 19.5 mm
• Thickness: 18 mm

If your damaged or missing cover has the same outside diameter, mounting diameter and thickness, and your spa is a Marquis Spas model marketed since 2003, this cap is a likely match.

How to choose the right replacement cap

Start by confirming the make and approximate year of your hot tub. This cap is listed for Marquis Spas models marketed since 2003, so an older spa may need a different part.

Next, compare the three measurements above with your existing cover. A small difference in the mounting diameter or thickness can mean the cap will not sit correctly on the valve, so take your time with this check. If you still have the old cap, look for the Waterway part number 350-6292 on it as well.

Related diverter valve parts

This listing covers the cap only. If you are also looking at the internal part of the valve, see the Marquis Spa 3-way diverter valve insert, which is listed separately.

Replacing the cover on its own can be a simple way to restore the look and finish of the diverter valve on your spa, as long as the size matches your valve.