Waterway - LED Pop-Up Spa Fountain - 675-0908L

Waterway – LED Pop-Up Spa Fountain

The Waterway 675-0908L is a small LED pop-up fountain for a spa or hot tub, built so that it can be lit from below by LEDs. Its nozzle rises with the water pressure and lowers again by itself when the tap is turned off. This makes it easier to put the spa cover on. If you need a replacement pop-up fountain with these exact dimensions and connection, check the details below.

How the Waterway 675-0908L pop-up fountain works

This hot tub fountain is a pop-up type. When water pressure is applied, the nozzle lifts out of the housing. When the tap is closed, the nozzle goes back down on its own, so nothing sticks up when you fit the spa cover.

The fountain can be illuminated from below by LEDs, so it can also work as a light feature when it is in use.

Flow rate and connection

This fountain is normally expected to have a flow rate of 12-20 litres per minute. Keep this in mind when you check it against the water supply on your spa.

The connection is a ribbed end with a diameter of 22 mm. It is designed to be inserted into a 3/4″ pipe.

Fitting and dimensions

Measure the existing opening and compare it with the figures below before ordering a replacement:

• Drill diameter: 80 mm
• Face diameter: 85 mm
• Screw thread diameter: 63 mm
• Height: 150 mm

The drill diameter is the size of the hole needed for the fountain. The face diameter is the visible part on the surface.

How to choose the right part

Check the part number on your current fountain and compare it with Waterway 675-0908L. Also compare the drill diameter, thread size and 22 mm ribbed connection with your existing installation. If you are not sure that this pop-up fountain suits your spa, contact us with the part number of your current part.