SPEARS - 45° Elbow 2" F/F for Hot Tub and Spa Piping - PPS-10630

SPEARS – 45° Elbow 2″ F/F for Hot Tub and Spa Piping

This Waterway 45° elbow (2″ F/F) is a replacement spa pipe fitting that joins two 2-inch pipes at a gentle 45-degree angle. It is a sweep elbow made from ABS plastic, designed for hot tub and spa plumbing, and it works with both rigid and flexible 2-inch pipe.

Because it turns the pipe by only 45 degrees, it suits runs that need a gradual change of direction, unlike a 90-degree elbow.

Where this 45° elbow is used

The elbow connects 2-inch pipes together in the pipework of a hot tub or spa. It is made for both 2-inch rigid ABS pipe and 2-inch flexible pipe, so you can use it in either type of installation.

It is a sweep elbow, meaning it changes the direction of the pipe by 45 degrees. Two of them can be combined where your layout calls for a larger change of direction.

Size and dimensions

Both ends of this fitting are 2-inch female connections. The inside diameter of each female end is 60 mm.

• Connection: 2″ female x 2″ female
• Angle: 45 degrees
• Inside diameter: 60 mm
• Material: ABS plastic

If you are unsure how pipe sizes in inches relate to millimetres, read our guide: Confused by sizes in inches and millimeters?

How to choose the right elbow

Start with the angle your pipework needs. This fitting turns the line by 45 degrees. If you need a sharper turn, a 2-inch 90-degree sweep elbow is the alternative.

Then check the pipe size. This elbow is for 2-inch pipe only, so measure your existing pipe or fitting before you order. Remember that the female ends have a 60 mm inside diameter.

What is included

You receive a single 45° elbow, 2″ F/F. Pipes and any other fittings are sold separately, so check how many elbows your layout needs before you order.