Sorodist - 25 mm Flexible Pipe for Hot Tubs and Spas, Per Metre - PPS-10288

Sorodist – 25 mm Flexible Pipe for Hot Tubs and Spas, Per Metre

This Sorodist 25 mm flexible pipe is made for use in hot tubs and spas, and it is sold by the metre and cut to the length you need. It has a 25 mm outside diameter and a 20 mm inside diameter, so compare these figures with your existing plumbing before you order.

Ordering flexible pipe by the metre

The price shown is for one metre. Enter the number of metres you need and we will cut the flexible pipe to that length. If you order several metres, you receive them as one continuous piece rather than as separate short lengths.

You can order up to 25 metres in this way, which matches the length of a full roll. If your job needs a lot of pipe, it is worth comparing the two options.

Technical specifications and pressure ratings

The pipe is specified as follows:

• Outside diameter: 25 mm
• Inside diameter: 20 mm
• Working pressure at 23°C: 5.6 bar / 81 psi
• Working pressure at 55°C: 1.6 bar / 23.2 psi

The working pressure is much lower at 55°C than at 23°C. Keep both figures in mind when you judge whether this pipe suits the way your spa plumbing is used.

How to choose the right size

A replacement pipe only works if its size matches the fittings it will connect to. Measure the outside and inside diameter of the pipe you are replacing and compare the results with 25 mm and 20 mm.

Spa parts are often described in both inches and millimetres, which can cause mix-ups. If you are unsure how the two systems relate, read our guide to sizes in inches and millimetres before you order.

What is included

This listing is for the flexible pipe only, supplied in the length you select. Any other parts you need for your installation should be chosen separately.