Simaco - Pump Union Female Part, 63 mm Exit for SAM-2 Pumps - 294534

Simaco – Pump Union Female Part, 63 mm Exit for SAM-2 Pumps

The Simaco pump union with 63 mm exit (part number 294534) is the female part of a pump union, intended for repairing a damaged nut on Simaco SAM-2 single and two-speed pumps. Combined with a 63 mm union ring and an O-ring, it forms a union for a 63 mm pipe. It is the female part only, so check what you need before ordering a replacement.

Compatibility with Simaco SAM-2 pumps

This replacement union part is made for Simaco SAM-2 pumps, in both the single-speed and the two-speed version. If your spa has a different pump, this part is not the one to choose.

Before you order, confirm that the pump on your spa is a Simaco SAM-2 and that the damaged part is the female side of the union.

Fitting and dimensions

The part has an inner diameter of 63 mm and a height of 45 mm. Measure your existing union part and compare the figures with those below to be sure of a match.

• Inner diameter: 63 mm
• Height: 45 mm
• Pipe size of the finished union: 63 mm
• Simaco reference: 294534

How the union is assembled

The female part does not make a complete union on its own. To build a union pump connection for a 63 mm pipe, it is combined with a 63 mm union ring and an O-ring.

If you are repairing a worn connection, check the condition of these other components at the same time, so the whole union is ready to be refitted.

What to check before ordering

Use the following points to choose the right part for your pump:

• Confirm that your pump is a Simaco SAM-2, single or two-speed.
• Check that the connection is for a 63 mm pipe.
• Compare the inner diameter (63 mm) and height (45 mm) with your old part.
• Quote Simaco reference 294534 if you need to compare it with the number you already have.