Simaco - Anti-Vibration Feet Set of 4 for Pumps - 278348

Simaco – Anti-Vibration Feet Set of 4 for Pumps

The Simaco 278348 anti-vibration feet are replacement vibration dampeners for pumps. Each foot is a cylinder of compact rubber mounted on a threaded rod, and the set suits most pump models, including Simaco pumps. They are supplied as a set of four with nuts, so you can replace all the feet in one go.

What these anti-vibration feet do

These pump dampeners absorb vibrations from the pump and reduce the noise level. The design is simple: a cylindrical piece of compact rubber fixed to a threaded rod, which is held in place with the supplied nuts.

If you are replacing worn or missing feet on your pump, the Simaco 278348 set gives you four matching dampeners at once, so every mounting point is the same.

Compatibility with Simaco and other pumps

The feet are described as compatible with most pump models and are listed for Simaco pumps. Pump designs vary, so before ordering, compare the thread size and the rubber diameter with the feet currently on your pump.

If you are not sure whether this set is the right replacement for your pump, contact us with the reference number or model name shown on your pump, and we will help you check.

Dimensions and fitting

Measure your existing feet against the figures below to confirm they match:

• Rubber cylinder diameter: 25 mm
• Total length: 53 mm
• Threaded rod length: 16 x 2 mm
• Threaded rod diameter: 6 mm

Because the dampener is built on a threaded rod, it is attached with a nut, and the nuts are included with the set.

What is included

The Simaco 278348 anti-vibration feet are sold as a set of four, with nuts included. No other pump parts are part of this set.