Nr. Description Part Nr. exploded view & spare parts
Spare parts list
Flotide/MEGA Filter Basket Assembly for XR2 & XR3 – 150 Micron - 7040092
€220,45
Pool Cleaner Battery Box Assembly - 7040093
€573,95
Rear Roller Brush Assembly - 7040094
€143,45
Small Drive Pulley (Replacement Spare Part) - 7040095
€29,45
Track
€102,45
Large Pulley for Belt-Driven Pool Pump - 7040097
€43,95
Robotic Pool Cleaner Front Roller Brush Assembly - 7040098
€135,45
Large Drive Pulley for Belt-Driven Pool Pump - 7040099
€43,95
Pool Pump Support Gear - 7040100
€15,95
Drive Motor Assembly - 7040101
€317,95
Left Pump Assembly - 7040102
€231,45
Left Propeller Assembly (Fan Blade) – Heat Pump Spare- 7040103
€17,45
Right Pump Assembly - 7040104
€231,45
Right Propeller Assembly (Pool Heat Pump Spare Part) - 7040105
€17,45
Description
The search confirms Bosta as a pool equipment brand (Bosta UK). The BOM is clearly for a robotic pool cleaner with dual-pump propulsion, tracked drive, roller brushes, and a battery-powered chassis. I have enough detail from the BOM itself to write accurate, grounded copy. Here is the HTML:
Bosta robotic pool cleaner exploded view & spare parts
This page provides the full exploded-view diagram and numbered bill of materials for the Bosta robotic pool cleaner, covering every serviceable component from the filter basket assembly through to the drive motor and charging accessories. No factory cross-reference numbers have been issued for this model family, so the diagram position numbers and SKUs shown here are the definitive identifiers to use when ordering. Whether you are a pool owner carrying out routine maintenance or a technician completing a full strip-down, the diagram and parts list below will let you pinpoint the exact component you need within minutes. Positions without a listed SKU are structural housings or cosmetic panels that are not currently available as individual spare parts.
How to use the numbered diagram to find your part
Every circled number on the exploded-view diagram corresponds directly to a numbered row in the parts list below the image. The most reliable approach is to work from the area of the cleaner that is faulty — for example, the drive section, the filtration zone, or the propulsion assembly — locate the relevant call-out numbers in that area of the diagram, then match those numbers to their rows in the bill of materials to find the part description and SKU. Once you have the SKU, add it directly to your basket. Be aware that some descriptions appear more than once in the list: positions 8 and 15 are both described as “Large Pulley” but carry different SKUs (7040097 and 7040099 respectively), because they are located on opposite sides of the drivetrain and may not be interchangeable. Similarly, positions 7 and 17 are both listed as “Chassis Cover” — check the diagram carefully to confirm which side or section of the chassis you are replacing before ordering. Where a position number has no SKU shown, the component is a structural or cosmetic part that is not stocked as a separate spare; if you require one of these items, please contact us directly. Finally, position 26 in the diagram covers the handle, an assortment of self-tapping and combination screws, and several ancillary items including the suction port baffle (SKU 7040106), drainage outlet baffle (SKU 7040107), front scraper (SKU 7040108), switch assembly (SKU 7040109), and charger variants — always read the full position 26 description row carefully, as the individual sub-items each carry their own SKU.
Main replaceable assemblies on the Bosta robotic pool cleaner
The filtration system centres on the filter basket assembly at position 1 (SKU 7040092), which captures debris drawn in during each cleaning cycle and is one of the most frequently replaced consumable assemblies on any robotic cleaner. Propulsion is handled by a tracked system: the rubber track at position 6 (SKU 7040096) wraps around a small pulley at position 5 (SKU 7040095) and two large pulleys at positions 8 and 15 (SKUs 7040097 and 7040099), translating motor torque into forward movement across the pool floor. The drive motor assembly at position 18 (SKU 7040101) powers the entire drivetrain and is the core mechanical component to inspect when the cleaner loses mobility. Scrubbing is performed by the front roller brush assembly at position 10 (SKU 7040098) and the rear roller brush assembly at position 4 (SKU 7040094), both of which are subject to wear over a season and benefit from annual inspection. The support gear at position 16 (SKU 7040100) is a key transmission component linking motor output to roller brush movement. Hydraulic suction and water circulation are managed by a dual-pump arrangement: the left pump assembly at position 20 (SKU 7040102) pairs with the left propeller assembly at position 21 (SKU 7040103), whilst the right pump assembly at position 23 (SKU 7040104) pairs with the right propeller assembly at position 24 (SKU 7040105) — together these create the balanced water flow that maintains consistent suction across the cleaning head. The battery box assembly at position 3 (SKU 7040093) houses the power cells and is the starting point to investigate if the unit fails to hold charge or does not power on. Charging is handled by region-specific chargers covered under position 26, with a EU version (SKU 7040110) and a UK version (SKU 7040111) available — ensure you select the variant appropriate for your mains supply.
Choosing between variants and pack sizes
The most important variant decision on this cleaner is the charger: the EU version (SKU 7040110) and UK version (SKU 7040111) are listed separately under position 26 and are not interchangeable, so confirm your local plug standard before ordering. The two large pulleys at positions 8 and 15 share the same description but differ in their location within the drivetrain; if you are replacing only one, use the diagram to confirm which position number corresponds to the pulley that is damaged rather than ordering both by default. Position 26 also includes several screw types — ST4.2×13 self-tapping screws, PWB4×8, PWB4×16, and PWB4×18 pan-head screws, and M3×8 combination screws — each of which differs in thread form, diameter, and length; fitting the wrong fastener can strip threads in the plastic housing or result in inadequate clamping, so match the description precisely to the screw you are replacing. Where you are unsure of the exact screw specification needed, refer to the diagram callout and cross-check the thread diameter and length against the original before placing your order.