Nr. Description Part Nr. exploded view & spare parts
Spare parts list
Controller Box with Power Cord for Flotide/MEGA XR2 / CIPU Robotic Pool Cleaner - 7032346
€466,45
Small Fine Wheel Brush for Flotide/MEGA Robotic Pool Cleaner XR2 / CIPU - 7032348
€48,45
Flotide/MEGA Robotic Pool Cleaner Main Body Housing Grey (XR2 / CIPU) - 7032349
€164,45
Flotide/MEGA Robotic Pool Cleaner Drive Wheel ø 13 cm White (XR2/CIPU) - 7032350
€52,45
Drive Wheel Fixing Block for Flotide/MEGA Robotic Pool Cleaner XR2 / CIPU - 7032351
€7,95
Blue Side Panel for Flotide/MEGA Robotic Pool Cleaner XR2 / CIPU - 7032352
€46,45
Drive Belt for Flotide/MEGA Robotic Pool Cleaner XR2 / CIPU (Pack of 2) - 7032353
€42,45
Drive Wheel ø 7.5 cm White for Flotide/MEGA Pool Cleaner XR2 / CIPU - 7032354
€33,95
White Sleeve with Internal Hexagon for Flotide/MEGA Pool Cleaner XR2/CIPU - 7032355
€19,95
Small Coarse Wheel Brush for Flotide/MEGA Robotic Pool Cleaner XR2 / CIPU - 7032356
€66,45
Filter Basket Holder White for Flotide/MEGA Robotic Pool Cleaner XR2/CIPU - 7032357
€85,45
Floating Cable Blue 3-Wire for Flotide/MEGA Pool Cleaner XR2/CIPU - 7032358
€613,45
Filter Paper Core White/Blue for Flotide/MEGA Pool Cleaner XR2/CIPU - 7032359
€142,45
Flotide/MEGA XR2 Floatable Wire Assembly for Robot Pool Cleaner - 7035116
€602,45
Flotide/MEGA XR2 Robotic Pool Cleaner Water Route - 7035117
€62,95
Flotide/MEGA Robotic Pool Cleaner Impeller – Type XR2 - 7035118
€44,95
Flotide/MEGA Motor and Lamp Box for Robot Pool Cleaner XR2 - 7035119
€872,95
Flotide/MEGA Right Gear Group for Robot Pool Cleaner Type XR2 - 7035120
€72,45
Flotide/MEGA XR2 Robotic Pool Cleaner Upper Cover Components - 7035121
€204,95
Flotide/MEGA XR2 Robotic Pool Cleaner Counterweight Group - 7035122
€111,95
Description
The web search confirms Bosta as a water technology and pool equipment brand (bosta.co.uk), and the BOM itself clearly describes a robotic pool cleaner with a controller box, drive system, brushes, filtration, and motorbox. I have enough to write accurate, BOM-grounded copy without inventing any unsupported claims.
Bosta robotic pool cleaner exploded view & spare parts
This page provides the official exploded-view diagram and full bill of materials for the Bosta robotic pool cleaner, covering every serviceable component from the controller box (position 1) through to the counterweight group (position 22). Use the diagram alongside the numbered parts list below to pinpoint exactly which component needs attention before placing your order. No factory parent references are registered for this model, so the SKUs listed here are the definitive identifiers for each part. With 22 numbered positions mapped to individual SKUs, most visitors locate the part they need within a few minutes.
How to use the numbered diagram to find your part
Every numbered call-out printed on the exploded-view diagram corresponds directly to a row in the parts list below — the position number in the diagram is the same number shown in the “Nr.” column of the table. Start by identifying the general area of the cleaner where the fault or wear has occurred — for example, the drive system, the filtration section, or the electrical enclosure — then scan the diagram for the call-out number that points to the faulty component. Once you have the position number, find the matching row in the parts list to retrieve the SKU, which is what you add to your basket. Be aware that some positions cover an entire sub-assembly rather than a single piece: position 1, for instance, is listed as the controller box including power cord, meaning you receive the complete assembly under that SKU. A small number of positions carry a “+” prefix in the description (positions 1 and 7), which indicates that the part is shown linked to another position in the diagram — take a moment to read the full description before ordering to make sure you are purchasing the correct grouping. Also note that position 19 does not appear as a standalone row because it is incorporated into the position 7 side panel entry; if you are looking for position 19, order SKU 7032352. Finally, if you are unsure whether a part number has changed, use the SKU rather than the description as your primary reference, as descriptions can vary between revisions of the diagram.
Main replaceable assemblies on the Bosta robotic pool cleaner
The Bosta robotic pool cleaner is built around a small number of key sub-systems, each of which can be serviced independently using the parts on this page. The electrical and control system centres on position 1, the controller box including power cord, with the power cord also available separately as position 2 in both standard and UK-plug variants (SKUs 7032347 and 7033431 respectively). The drive system consists of the drive wheel (position 5), the drive wheel fixing block (position 6), the driven wheel (position 9), the sleeve (position 10), and the drive belt (position 8, SKU 7032353) that links them — the belt is typically the first drive component to show wear and is straightforward to replace. Structural enclosure parts include the main house (position 4, SKU 7032349), the side panel covering positions 7 and 19 (SKU 7032352), and the upper cover components (position 21, SKU 7035121). The brushing system uses two types of brush: the standard wheel brush at position 11 (SKU 7032356) for the main cleaning pass, and the small wheel brush at position 3 (SKU 7032348) for tighter areas. Filtration is handled by the filter basket (position 12, SKU 7032357) and the filter paper core (position 14, SKU 7032359), both of which benefit from regular inspection and periodic replacement to maintain suction efficiency. The hydraulic path runs through the water route (position 16, SKU 7035117) and the impeller (position 17, SKU 7035118), while the motorbox and lampbox are supplied as a single combined assembly at position 18 (SKU 7035119). The floatable wire assembly (position 15, SKU 7035116) and the floating cable (position 13, SKU 7032358) manage the power and signal connection between the cleaner and the controller without tangling. Finally, the right gear group (position 20, SKU 7035120) and counterweight group (position 22, SKU 7035122) complete the mechanical drivetrain and balance the unit correctly in the water.
Choosing between variants and pack sizes
The most important variant to note on this diagram is position 2, the power cord for the controller box, which is listed with two distinct SKUs: 7032347 for the standard version and 7033431 for the UK-plug version. If you are based in the United Kingdom or are replacing a cord on a unit purchased through a UK supplier, ensure you select the UK-plug variant (SKU 7033431) to avoid a mismatch at the wall socket. For all other positions on this diagram, each SKU represents a single, defined assembly or component with no further size sub-variants indicated in the bill of materials, so there is no risk of selecting the wrong thread pitch or diameter on those items. If you are ever in doubt about whether a part has been superseded or re-kitted since your cleaner was manufactured, cross-reference the position number against the SKU shown here and contact our team before ordering — it is always quicker to confirm first than to return an incorrectly specified part.