Nr. Description Part Nr. exploded view & spare parts
Spare parts list
Description
Good — I have enough context. The Bosta product reference `0180605` corresponds to the **Naia Robot** (model `HJ1009`), with a 12 m cable length and a volume capacity of 15 m³/hr, designed for flat pool floors. I’ll now compose the landing page HTML using only what is verifiable from the BOM and that source.
Bosta Naia Robot (HJ1009) exploded view & spare parts
This page covers the complete exploded-view diagram and bill of materials for the Bosta Naia Robot automatic pool cleaner, factory reference 0180605, model HJ1009. The diagram shows every numbered component — from the top cover and handle assembly down to the chassis, wheels, filter system, and motor — in the exact arrangement used on the production unit. Two power-supply cable lengths appear in the list (SKUs 7014613 and 7014614), so please confirm which variant you own before ordering. Work through the numbered call-outs below and you will be able to identify the part you need in a matter of minutes.
How to use the numbered diagram to find your part
Each numbered call-out on the diagram corresponds directly to a row in the parts table beneath it; matching the number in the diagram to the same number in the table gives you the part description and, where available, the SKU to use at checkout. Start by locating the area of the robot where the fault or wear has occurred — top cover, filter bay, drive train, or motor zone — and then trace the call-out number for that component. Be aware that some position numbers appear more than once in this bill of materials: position 2, for example, covers the nozzle cover axis as well as two distinct orderable SKUs (7007421 and 7007417), which are different variants of that assembly. Similarly, position 1 carries three separate SKUs (7013105, 7007418, and 7014613/7014614) representing different sub-components or cable options at that location. Where a quantity figure appears at the end of a description — such as “Cross pan-head self-tapping screw 4” at position 10 — that trailing number is the quantity per unit, not a separate part number, so do not confuse it with the position index. If only one SKU is listed for a position, that is the only orderable option currently available; positions without a SKU are shown for reference and identification purposes. When in doubt about which variant applies to your unit, note the full description alongside the position number and contact our team before ordering.
Main replaceable assemblies on the Bosta Naia Robot
The Naia Robot is built around five broad sub-assemblies, all of which are represented in this diagram. The upper body comprises the top cover (position 7), nozzle (position 3), nozzle cover axis (position 2), and the two-part handle formed by the upper and lower handle covers (positions 4 and 5); these are the parts most likely to suffer impact damage or UV degradation over time. The filtration bay sits at the heart of the unit and includes the dome (position 13), top floater (position 11), filter bag and filter bag holder (positions 25 and 26), filter base (position 29), and the water inlet and outlet plates (positions 27, 48, and 49); the diagram also shows an older-style filter assembly at positions 52, 53, and 54 for earlier production units. Water flow through the body is guided by the water outlet conduit (position 14) and directed via the clamps assembly (position 24) and the net (position 47). The motor assembly at position 17 is the electrical heart of the cleaner; it works in conjunction with the impellers (position 20), sleeves (position 19), and associated washers — standard (position 18), large (position 21), and spring (position 22) — which together form the hydraulic drive circuit. The drive and chassis section carries the chassis itself (position 39), four wheels (position 34), plastic bearings (position 51), retaining rings (position 33), side handles (position 35), side handle covers (position 37), and the locking mechanism made up of the lock (position 42), hooks (position 43), lock plates (position 44), lock axes (position 45), and cap nuts (position 46). The springs (position 28) and snaps (position 30) complete the latching system that holds the filter bay securely closed during operation.
Choosing between variants and pack sizes
Several fastener positions — 6, 8, 10, 12, 15, 16, 23, 32, 36, 38, 40, 50, and 55 — are cross pan-head or countersunk self-tapping screws supplied in packs; the trailing number in each description (for example, “8” in position 16 or “12” in position 40) denotes the quantity included per pack, so always order the full pack rather than individual screws to ensure you have enough for a complete re-assembly. Position 1 carries multiple SKUs, and position 2 carries two (7007421 and 7007417), meaning that different production runs or regional variants of the Naia Robot may use different sub-components at those locations; check your unit’s production label or the original assembly documentation to confirm which SKU applies to you. The power-supply cable at position 1 is available in at least two variants (SKUs 7014613 and 7014614), which are likely to differ by length or connector type — the Bosta Naia HJ1009 is specified with a 12 m floating cable, so confirm the cable length printed on your existing cable before selecting a replacement. Where a position currently has no SKU listed, the part may be supplied only as part of a larger sub-assembly; if you cannot find a standalone SKU for the part you need, contact our team and we will advise on the closest available option.