Skip to content

Norsup - Diffuser O-Ring 54 mm × 3 mm (Evo Pro) - 7036931

7036931
1-3 weeks
€2,45 tax inc.
Shipping Shipping 1-3 weeks
Certified Certified online store
Easy returns Easy returns within 14 days
Spare part Looking for a part?
Exploded view
Question Looking for advice?
Ask your question

Norsup – Diffuser O-Ring 54 mm × 3 mm (Evo Pro)

This is the genuine Norsup replacement O-ring that seals the diffuser inside the Norsup Evo Pro and Evo Pro VSTD pool pump. Its precise 54 mm inner diameter and 3 mm cross-section ensure a leak-free, pressure-tight fit between the diffuser and the pump body, maintaining full hydraulic efficiency. Replacing a worn or damaged diffuser O-ring promptly prevents water bypassing the impeller, which would reduce flow rate and increase energy consumption.

Compatibility

This O-ring is designed specifically for the Norsup Evo Pro (single-speed) and Evo Pro VSTD (variable-speed) pool pumps. Always verify the diffuser dimensions on your pump before ordering — the 54 × 3 mm size is not interchangeable with O-rings from other Norsup pump families such as the Evo+.

Why Genuine Matters

As an OEM part, this O-ring is manufactured to Norsup’s exact material and dimensional tolerances, ensuring long-term resistance to chlorinated and salt-treated pool water, heat, and continuous pressure cycles. Aftermarket substitutes may differ in hardness or compound, leading to premature failure and potential pump damage.

Installation

Installation requires draining and opening the pump wet-end to access the diffuser. Clean the seating groove thoroughly, lightly lubricate the new O-ring with a silicone-based grease, seat it evenly without twisting, and reassemble to the manufacturer’s specified torque. If you are not confident working inside pump wet-ends, a qualified pool technician is recommended.

Additional information

Compatible Pump: Norsup Evo Pro, Evo Pro VSTD
O-Ring Inner Diameter: 54 mm
O-Ring Cross-Section: 3 mm
Position in Pump: Diffuser seal
Part Type: OEM replacement O-ring