LX Pump Co. - WEE10 Spa Circulation Pump with AMP Plug - WEE10

LX Pump Co. – WEE10 Spa Circulation Pump with AMP Plug

The LX Whirlpool WEE10 is a compact, new-generation hot tub circulation pump for spa filtration and heating circuits. It replaces the LX Whirlpool WE10 circulation pump, which many spa manufacturers have used, and draws only 70 W compared with 180 W for the WE10. Instead of a through-shaft and mechanical seal it uses a magnetic drive.

WEE10 circulation pump: what changes compared with the WE10

The WEE10 is designed as a more energy-efficient alternative to the WE10 while remaining suitable for spa circulation systems. If you are replacing a WE10 and want a lower power draw, this is the pump to look at.

Traditional circulation pumps have a through-shaft and mechanical seal. The WEE10 uses a magnetic drive system instead. This removes direct contact between the motor and the hydraulic section, which reduces the risk of leaks and limits wear on mechanical components.

Technical specifications and plumbing connections

• Power: 70 W
• Current: 0.5 A
• Maximum flow rate: 30 litres/minute
• Connections: 3/4″ barb

The 3/4″ barb connections are intended for 3/4-inch clear pipes, secured with hose clips.

Dimensions for fitting

Check that the new pump fits the space of your current one before ordering:

• Length: 209 mm
• Width: 120 mm
• Height: 131 mm

Cable and plug

The WEE10 is supplied pre-cabled with an AMP plug, with a cable length of 130 cm.

If your installation uses a mini J&J plug, you will need an adapter from AMP to mini J&J, which is sold separately. Alternatively, you can reuse the cable from your existing pump if it is in good condition.

Similar pump for comparison

The Laing E10 pump with 3/4″ barb connection is a similar alternative. It is as powerful (60 W) and has similar dimensions and flow rate to the WEE10.