LX Pump Co. - Heater Union Tailpiece 2" F Exit for LX Whirlpool H30-R1 - PPS-10369

LX Pump Co. – Heater Union Tailpiece 2″ F Exit for LX Whirlpool H30-R1

This LX Whirlpool 2″ heater union tailpiece is a replacement 2-inch union socket for selected LX Whirlpool hot tub and spa heaters, including the LX Whirlpool H30-R1 heater, 2″ version. It gives the heater a 2-inch female exit so that it can be connected to 2-inch pipe.

Compatibility with LX Whirlpool heaters

This union socket is compatible with some LX Whirlpool hot tub and spa heaters, not with every heater in the range. The H30-R1 is one of the heaters it fits.

Before ordering a replacement, check that your heater has a 2-inch union connection and that your plumbing uses 2-inch pipe. The part is made for 2-inch pipe only.

How to choose the right union tailpiece

If you are replacing a worn or damaged tailpiece, compare it with the details below. These are the points that matter when you pick a replacement:

• Pipe size: 2-inch pipe connects to the socket.
• Socket inside diameter: 60 mm.
• Thread outside diameter: 78 mm.
• Heater: LX Whirlpool, including the H30-R1.

If your old part has different measurements, it is probably not the same fitting, so do not order until you have checked.

Fitting and dimensions

The tailpiece is joined to the heater with a split nut and a gasket. You can find the matching LX Whirlpool 2″ heater split nut and the 59/75 mm flanged gasket for LX Whirlpool 2″ heaters on their own product pages.

When you replace the union socket, it is worth checking the condition of the nut and the gasket at the same time, as they form part of the same connection.

• Socket inside diameter: 60 mm, for 2-inch pipe
• Outside diameter of the thread: 78 mm

Where this part is used

The part sits between the heater and the 2-inch pipework of your hot tub or spa. Use it when the original union socket on your LX Whirlpool heater needs replacing and you want a fitting with the same 2-inch pipe connection.