LVJ Products - 3.5" Flying Directional Hot Tub Jet - L-4481H
LVJ Products – 3.5″ Flying Directional Hot Tub Jet
The LVJ L-4481H is a 3.5″ Flying Directional hot tub jet with a stainless steel and textured grey plastic face. It is a replacement spa jet that can take the place of any other jet from the LVJ Regular range. Unlike clip-in jets, it threads into its socket.
Compatibility with the LVJ Regular range
The L-4481H Flying Directional jet can be used to replace any other jet from LVJ’s Regular range. The part number is listed as LVS/LVJ L-4481H, so look for this reference when you compare it with the jet you are replacing.
LVJ makes other jets that you may come across while searching, such as the LVJ 3.5″ jet – Crystal Directional, the LVJ 3.5″ jet – Crystal Multi-massage and the LVJ 4″ jet – Tourbillon Twin Roto. Each of these is a different jet, so check the model name and part number before you order.
Flying Directional massage
This is a rotating jet. It gives a massage of consistent pressure, delivered to a precise point on your body, and that point is easy to adjust. If you want a focused massage on one area rather than a spread-out effect, this is the type of jet described.
The face combines stainless steel with textured grey plastic, so it is easy to tell apart from other jets in the spa at a glance.
Fitting and dimensions
The jet threads into its socket instead of clipping in. Make sure your existing jet is a threaded type before you replace it. The socket is a separate part: see the LVJ Regular 3.5″ and 4″ jet socket if you need to check or replace it.
Jet dimensions:
- Length: 115 mm
- Face diameter: 91 mm
- Length of rear element: 92 mm
- Outside diameter of water inlet: 23 mm
- Thread diameter: 37 mm
Compare these measurements with your current jet to confirm that you are ordering the right replacement.
Choosing the right jet
Start with the model name and part number of the jet you want to replace. This page covers the Flying Directional jet L-4481H only. If your jet has a different massage action, a different size or a clip-in fitting, it is better to look for the matching LVJ model instead.
Additional information
| Weight: | 0,30 kg |
|---|---|
| Brand: | LVJ |
| Product type: | Hot tub jet, Flying Directional |
| Part number: | L-4481H |
| Length: | 115 mm |
| Face diameter: | 91 mm |
| Rear element length: | 92 mm |
| Water inlet outside diameter: | 23 mm |
| Thread diameter: | 37 mm |
| Fitting: | Threaded into socket |
In details
- Stainless steel and textured grey plastic face
- Consistent-pressure massage on an easily adjustable point
- Can replace any other jet from the LVJ Regular range
- Threaded fitting into its socket
- Threads into its socket and does not clip in
- Replaces jets from the LVJ Regular range only