Laing - E10 Filtration Pump with Mini J&J Plug for Dimension One Spas - E10-NSHNNNN2W-01
Shipping 1-3 weeks
Certified online store
Easy returns within 14 days
Looking for advice?
Laing – E10 Filtration Pump with Mini J&J Plug for Dimension One Spas
The Laing E10 spa pump with mini J&J plug (part number E10-NSHNNNN2W-01) is a small filtration pump for hot tubs, made by Laing (Xylem) and listed as a replacement for Grundfos 738191. It is the newer version of the E10 that Dimension One used between 1998 and 2008. What sets it apart from other E10 pumps is the specific mini J&J plug on its cable.
Compatibility and part numbers
This replacement hot tub pump is intended for Dimension One spas built with the E10 between 1998 and 2008. Because the plug is specific to those hot tubs, check that it matches the connector on your current pump before ordering.
The pump is also listed under these reference numbers, which you can compare with the label on your existing pump:
- Laing: E10-NSHNNNN2W-01, 6080U0012, 6050U0018
- Previous Laing numbers: 6080U0038, LHB07100089
- Dimension One: 01512-321, 01512-321YU
- Vita Spa: 0420444
- HydroQuip: SPR227, LHB07100162, 10-0121-A-K
The Laing E10 pump with 3/4-inch barb connection is listed separately, so make sure you pick the version with the plug your spa needs.
Technical specifications and dimensions
The E10 is designed to run 24 hours a day. It has no spindle, so it is almost impossible for water to leak from the wet end into the motor.
- Power: 60 W, 1/40 HP
- Maximum flow rate: around 40 litres per minute (listed as 11 GPM)
- Length: 152 mm
- Width: 110 mm
- Height: 125 mm
Cable, plug and pipe connection
The pump is supplied pre-cabled with the specific mini J&J plug, on a cable length of 40 cm.
The pipe connections are 3/4-inch barbs. They connect to 3/4-inch clear pipe using a hose clip, for example a clamp for 3/4″ tubing.
Rotor assembly as the spare part
The only replacement part for the E10 pump is the rotor assembly, which has a diameter of 80 mm. See the Laing E6 and E10 rotor assembly, Ø 80 mm. Take care not to confuse it with the Ø 68 mm version, and check the diameter of the part you want to replace.
Documentation
The installation instructions can be downloaded below on this product page.
Additional information
| Weight: | 4,50 kg |
|---|---|
| Brand: | Laing (Xylem) |
| Product type: | E10 filtration pump |
| Part number: | E10-NSHNNNN2W-01 |
| Compatible systems: | Dimension One spas, 1998 to 2008 |
| Power: | 60 W, 1/40 HP |
| Maximum flow rate: | approx. 40 l/min (11 GPM) |
| Connection: | 3/4-inch barb |
| Plug: | Mini J&J, cable 40 cm |
| Dimensions: | 152 x 110 x 125 mm |
| Rotor assembly: | Ø 80 mm |
Documents
-
Download
Laing E14 – Installation instructions
718 KB
In details
- Supplied pre-cabled with the mini J&J plug (40 cm cable)
- Designed to run 24 hours a day
- Spindle-free design, so water is almost impossible to leak into the motor
- Compact: 152 x 110 x 125 mm
- Rotor assembly available as a spare part
- Plug is specific to Dimension One hot tubs
- Rotor assembly comes in two diameters (Ø 80 mm and Ø 68 mm), so check before ordering
