Skip to content

Keersi - Hot Tub Headrest Fixing Post - PPS-10239

Keersi PPS-10239
1-3 weeks
€1,45 tax inc.
Shipping Shipping 1-3 weeks
Certified Certified online store
Easy returns Easy returns within 14 days
Question Looking for advice?
Ask your question

Keersi – Hot Tub Headrest Fixing Post

This Keersi hot tub headrest fixing post is a small replacement part that holds a spa headrest in place. It is attached to the spa shell with a stainless steel screw and fits into notches in the back of the headrest. It measures 17 mm in diameter and 13.4 mm in length, so you can compare it with the post you already have.

How the headrest fixing post works

The job of this post is simple: it keeps the headrest secured to the spa shell. The post is fixed to the shell with a stainless steel screw, and the back of the headrest then fits onto it.

Look at the back of your headrest and you will see notches. These are the points where the post fits in, so the headrest is held in position once it is pushed home.

Fixing post dimensions

The size of the post is the most important detail when you are replacing a headrest fixing post. The measurements for this part are:

  • Diameter: 17 mm
  • Length: 13.4 mm

Use a ruler or calipers on your existing post and compare both figures before you order. A post of the same size should sit correctly in the notches of the headrest.

What is included and what is sold separately

You receive the fixing post only. The stainless steel screw used to attach the post to the spa shell is not included, so you will need to have a suitable screw ready when you refit the headrest.

If you are reusing the screw from your old post, check that it is still in good condition before you fit the new one.

How to choose the right replacement post

This page describes the post by its size and fitting method rather than by a list of spa models, so the safest way to choose is to compare it with the part you have. Take the headrest off, look at the post on the shell and measure its diameter and length.

  • Check that the diameter is 17 mm.
  • Check that the length is 13.4 mm.
  • Check that the notches in the back of your headrest are designed to take a post like this.

If all three match, this Keersi headrest fixing post is the right replacement for your hot tub.

Additional information

Weight: 1,00 kg
Brand: Keersi
Product type: Headrest fixing post
Used for: Hot tub headrest
Diameter: 17 mm
Length: 13.4 mm
Fixing: Stainless steel screw (not included)
Engages with: Notches in back of headrest

In details

  • Holds the hot tub headrest in place on the spa shell
  • Fits into the notches in the back of the headrest
  • Fixed with a stainless steel screw
  • Clearly stated dimensions: 17 mm diameter, 13.4 mm length
  • Stainless steel fixing screw is not included
  • No specific spa models are listed, so check the size against your old post