InterPlast - 50 mm Double-Union Ball Valve - VAC50

InterPlast – 50 mm Double-Union Ball Valve

The InterPlast VAC50 is a 50 mm double-union ball valve that fits into a piping system to control the flow. It connects directly to 50 mm pipes, so it suits a line of that size without extra adaptation. Its union design lets you open the valve and remove any obstructions, which sets it apart from a simple fixed valve.

How the VAC50 double-union ball valve works

A ball valve is installed in a piping system to control the flow. The InterPlast VAC50 does this on a 50 mm line, giving you a point in the pipework where the flow can be managed.

The valve is of the union type. This means the valve can be opened up, so that any obstruction inside can be removed. If you are looking for a replacement valve that allows access to the inside, this design is the key feature to look for.

Size and connection

The VAC50 has an inside diameter of 50 mm and connects directly to 50 mm pipes. Before ordering, measure or check the size of your existing pipework, as this valve is intended for 50 mm pipes only.

• Product type: ball valve, double union
• Inside diameter: 50 mm
• InterPlast part number: VAC50

Spare o-rings

The o-rings of this valve are available as spare parts if you need them. The InterPlast 50 mm valve o-ring can be ordered separately, so you do not need to replace the whole valve for that item.

How to choose the right replacement valve

To pick the correct part, work through these points:

• Check that your pipes are 50 mm, matching the 50 mm inside diameter of this valve.
• Look for a ball valve of the union type if you want to be able to open it and remove obstructions.
• Compare the InterPlast part number VAC50 with the reference on your current valve or in your records.

Choosing by size and part number helps make sure the new valve connects directly to your 50 mm pipes as intended.