InterPlast - 32 mm Flexible Pipe for Hot Tubs and Spas, 25 m Roll - PPS-10235

InterPlast – 32 mm Flexible Pipe for Hot Tubs and Spas, 25 m Roll

This InterPlast 32 mm flexible pipe is supplied as a full 25 m roll for hot tub and spa plumbing. It has a 32 mm outside diameter and a 25 mm inside diameter, so check these sizes against your existing pipework before ordering. If you only need a short length, the same pipe is also available per metre.

Size and specifications of the 25 m roll

The roll contains 25 metres of flexible pipe in a single length, which suits larger repairs, pipework renewals or work where you want to avoid joins. The key dimensions are listed below.

• Outside diameter: 32 mm
• Inside diameter: 25 mm
• Length: one 25 m roll

The outside diameter is the figure to use when matching the pipe to fittings and connectors designed for 32 mm pipe.

Working pressure and temperature

The working pressure of this flexible pipe depends on the water temperature. The permitted pressure is lower at higher temperatures, so keep both figures in mind when planning your spa plumbing.

• At 23°C: 4 bar / 58 psi
• At 55°C: 1.3 bar / 19 psi

Compare these values with the conditions in your own system before you cut and fit the pipe.

How to choose the right size

Flexible pipe is sold by its outside diameter, so measure the pipe you are replacing rather than guessing. This product is a 32 mm outside diameter pipe with a 25 mm bore. If you are unsure how inch sizes relate to millimetre sizes, read our guide: Confused by sizes in inches and millimeters?

Always confirm that the pipe size matches your fittings and unions before ordering a full roll.

Sold as a roll or per metre

This listing is for one complete 25 m roll of 32 mm flexible pipe. For smaller jobs, the pipe can be bought by the metre instead, which avoids ending up with a large offcut.