Gecko - Spa Light Harness 240 cm for Gecko MSPA and in.ye Systems - 9920-400489

Gecko – Spa Light Harness 240 cm for Gecko MSPA and in.ye Systems

The Gecko 9920-400489 light harness is a replacement cord that connects the spa light system to the control box. It fits Gecko MSPA, in.ye-5, in.ye-5-V3 and in.yj-3 control systems. The plug has 3 pins and 2 wires (red and black), so compare these details with your existing hot tub light cable before ordering.

Compatibility with Gecko control systems

This spa light cable is listed for the following Gecko control systems:

• Gecko MSPA
• Gecko in.ye-5
• Gecko in.ye-5-V3
• Gecko in.yj-3

If your hot tub is fitted with one of these systems and the light cable needs replacing, the Gecko 9920-400489 is the matching harness. It is not described as suitable for any other control system, so please do not assume it will fit other brands or models.

Connector and wiring details

The harness is the link between the light system of the spa and the control box. Its plug has 3 pins and the cord carries 2 wires, one red and one black.

These details help you confirm that you have the right replacement when you hold the new cord next to the old one.

How to choose the right light harness

Start with the control system installed in your spa. Look at the name on the control box and check that it is one of the Gecko systems listed above: MSPA, in.ye-5, in.ye-5-V3 or in.yj-3.

Then compare the plug of your current cable with this one. The plug should have 3 pins and the cord should have a red and a black wire. The Gecko part number for this harness is 9920-400489, which is the number to search for or quote when you want to be sure you are ordering the same item.

Fitting and dimensions

The cord is 240 cm long. Before ordering, measure the route from the spa light to the control box and make sure this length suits the way your cable is laid in the cabinet.

• Length: 240 cm
• Plug: 3 pins
• Wires: 2 (red and black)
• Function: connects the spa light system to the control box