Gecko - in.link Cable 240 cm for in.xm and in.xe, 1300W Max - LC-1-5-240-8-T-CE

Gecko – in.link Cable 240 cm for in.xm and in.xe, 1300W Max

The Gecko in.link cable LC-1-5-240-8-T-CE is a 240 cm replacement spa cable that connects a Gecko in.xm or in.xe control system to a low-current device, up to 6A and 1300W. It has three wires (live, neutral and earth) and is supplied without a coloured polarizer, which has to be ordered separately.

Compatibility and suitable devices

This hot tub cable is designed for Gecko in.xm and in.xe control systems. It is intended for low-current equipment with a maximum load of 6A and 1300W, so it is not the right choice for anything that draws more than that.

Examples of devices you can connect with the LC-1-5-240-8-T-CE cable include:

• a 24-hour circulation pump
• an ozonator
• a blower
• an audio-visual gadget

Polarizers and how to choose the right cable

Coloured and tagged polarizers are designed to make it almost impossible to plug the wrong cable into the wrong socket. This in.link cable does not come with one, so you need to select the polarizer that matches the unit you want to connect and buy it separately.

If you need to connect a 2-speed pump, a different cable applies: see the Gecko in.link cable for 2-speed pump.

Before ordering, check the part number on your current cable and compare it with LC-1-5-240-8-T-CE, so that you are sure you are getting the right replacement.

Fitting and dimensions

The cable length is 240 cm. It is worth measuring the distance between your control system and the device you want to connect, so that you know the cable will reach comfortably.

The cable carries three wires: live, neutral and earth. Always keep the connected device within the 6A and 1300W limit.

What is included and documentation

You receive the in.link cable on its own. A coloured polarizer is not part of the delivery and must be purchased separately, depending on the unit you want to connect.

The installation instructions can be downloaded below on this page.