Fluidra - Lifting Eye Nut M12 for PTK 1200 Sand Filter

Fluidra – Lifting Eye Nut M12 for PTK 1200 Sand Filter

This is the genuine Fluidra replacement M12 lifting eye nut designed for the PTK 1200 series commercial sand filter arm assemblies in 1000–1200 mm tank diameters. It provides a secure, threaded attachment point used during the handling, positioning, or maintenance of large fiberglass filter tank sections. The ring-shaped loop design allows a hook or shackle to be attached, making it an essential hardware component for safe manoeuvring of heavy filter parts.

Compatibility

This eye nut is a direct spare part for the Fluidra PTK 1200 M/M arm filter assemblies with tank diameters of 1000 mm and 1200 mm (assembly references 04963 / 04974). The PTK 1200 series is a range of laminated polyester and fibreglass high-rate commercial sand filters widely used in public and large residential pool installations across Europe. Always cross-reference your filter’s assembly diagram to confirm this part number before ordering.

Why Genuine Matters

Using a genuine Fluidra part ensures correct M12 thread pitch and dimensional fit to the factory-specified stud or bolt on the filter assembly. Third-party substitutes may differ in thread tolerance, loop geometry, or load rating, which could compromise safe handling of the heavy filter tank. A genuine replacement also preserves full compatibility with the existing hardware on your PTK 1200 filter.

Installation

The eye nut threads directly onto an M12 male stud on the filter body or lid assembly. Due to their simple ring-top design, eye nuts can typically be installed by hand and tightened with a suitable tool. For commercial filter tanks, it is strongly recommended that installation and any lifting operations are carried out by a qualified pool technician following appropriate safe-lifting procedures.