Fluidra - Diffuser Assembly for EcoClear Plus 950 Sand Filter 2"

Fluidra – Diffuser Assembly for EcoClear Plus 950 Sand Filter 2″

This is the genuine Fluidra replacement diffuser assembly designed specifically for the EcoClear Plus Ø950 mm sand filter with a 2″ connection. The diffuser sits at the top of the filter tank and evenly distributes incoming water across the sand bed, ensuring consistent filtration performance and preventing channelling through the filter media. It is an essential internal component to replace when the original shows signs of cracking, distortion, or flow imbalance.

Compatibility

This diffuser assembly is a direct OEM replacement for the Fluidra EcoClear Plus 950 laminated fibreglass sand filter with a 2″ pipe connection. Always verify your filter’s model designation and connection size before ordering, as the EcoClear Plus range is available in multiple tank diameters and connection sizes — this part is specific to the Ø950 mm / 2″ variant.

Why Genuine Matters

Using a genuine Fluidra part guarantees an exact dimensional fit and material compatibility with the EcoClear Plus filter body, which is rated to a maximum working pressure of 2.5 bar. Non-OEM diffusers can distort under pressure or fail to seal correctly, compromising filtration efficiency and potentially voiding your filter warranty. Sourcing directly from an authorised Fluidra stockist ensures you receive the correct part first time.

Installation

The diffuser assembly is accessed through the top lid of the filter tank (Ø200 mm access port on 950 models). Isolate the pump, depressurise the system, and remove the multiport valve or top fitting before lifting out the old diffuser. Inspect the laterals and sand bed while the tank is open, then fit the new assembly and reassemble in reverse order. Professional installation is recommended if you are not familiar with sand filter servicing.