Flotide/MEGA - Pump Impeller for SS075 (0.75 HP) - 7009328
Flotide/MEGA – Pump Impeller for SS075 (0.75 HP)
This is the genuine Flotide/MEGA replacement impeller designed specifically for the Flotide/MEGA SS075 pool pump — a 0.75 HP centrifugal pump rated for 230 V / 50 Hz operation. The impeller is the core hydraulic component that drives water through the pump, and replacing a worn or damaged one restores full flow performance to your filtration system.
Compatibility
This impeller is an exact-fit replacement part for the Flotide/MEGA SS Series SS075 pool and spa pump (230 V / 50 Hz). The SS075 is a 0.75 HP pump featuring a 50 mm / 1½” metric-imperial glue-socket connection, used in medium to larger swimming pools with flow rates up to 14.4 m³/h. It is not compatible with other SS Series variants such as the SS050 or SS100, which use different impeller sizes.
Why Genuine Matters
A genuine Flotide/MEGA impeller ensures precise dimensional fit, correct hydraulic balance, and long-term durability within the SS075 pump body. Non-OEM impellers risk poor clearances, reduced flow, and accelerated wear on the mechanical seal and shaft — making the genuine part the only reliable choice for maintaining pump efficiency and prolonging equipment life.
Installation
Impeller replacement requires disassembly of the pump wet end and should be carried out by a qualified pool technician or competent installer. Always isolate power before beginning any work, and inspect the mechanical seal and diffuser O-ring for wear while the pump is open, replacing them if necessary to avoid repeat disassembly.
Additional information
| Compatible Pump Model: | Flotide SS075 |
|---|---|
| Pump Power: | 0.75 HP |
| Voltage / Frequency: | 230 V / 50 Hz |
| Pump Connection Size: | 50 mm / 1½" (metric/imperial glue socket) |
| Pump Max Flow Rate: | 14.4 m³/h |
| Part Type: | OEM Replacement Impeller |