Essentra - M20 x 1.5 Cable Gland for 5-13 mm Spa Power Cable - PPS-10232
Shipping 1-3 weeks
Certified online store
Easy returns within 14 days
Looking for advice?
Essentra – M20 x 1.5 Cable Gland for 5-13 mm Spa Power Cable
The Essentra M20 x 1.5 cable gland is a replacement spa cable gland that provides a watertight connection for the power supply to the spa. It accepts cables with a diameter from 5 mm to 13 mm, so it suits a range of supply cables as long as the thread size and cable diameter match.
Check both measurements before ordering, because a gland that is too large or too small for the cable will not give the connection you need.
What this spa cable gland does
A cable gland is the fitting that lets a cable pass through the wall of an enclosure while keeping moisture out. On a hot tub this matters wherever the power cable enters the spa. This M20 x 1.5 gland is intended to give a watertight connection for the power supply to the spa.
The product details do not name specific spa brands or control systems. Treat it as a general M20 x 1.5 gland and compare its dimensions with the part you are replacing.
Thread size and cable range
These are the dimensions given for this gland:
- Thread: M20 x 1.5
- Thread diameter: 19 mm
- Minimum cable diameter: 5 mm
- Maximum cable diameter: 13 mm
Measure the outer diameter of your power cable, including the outer sheath. If it falls between 5 mm and 13 mm, it is within the range of this gland. A cable outside that range is not suitable for this part.
How to choose the right gland
Replacing a gland like for like is the safest approach. Before you order, run through this short list:
- Measure the outer diameter of the cable that passes through the gland.
- Check the thread size of your existing gland or of the opening it screws into, which should be M20 x 1.5.
- Compare the thread diameter of 19 mm with your old gland.
- Confirm that the gland is used for the power supply cable and not for another connection.
Fitting notes
The gland is fitted where the power supply cable enters the spa. Because this connection carries the mains supply, switch off and isolate the spa before any work begins, and have the replacement carried out by a qualified electrician.
After fitting, check that the cable sits correctly in the gland and that the connection is firm, so that it stays watertight in everyday use.
Additional information
| Weight: | 5,00 kg |
|---|---|
| Brand: | Essentra |
| Product type: | Cable gland |
| Thread: | M20 x 1.5 |
| Thread diameter: | 19 mm |
| Minimum cable diameter: | 5 mm |
| Maximum cable diameter: | 13 mm |
| Use: | Spa power supply cable |
| Connection: | Watertight |
In details
- Watertight connection for the spa power supply
- Thread size M20 x 1.5
- Suits cables from 5 mm to 13 mm
- Made by Essentra
- Only suits cables within the 5-13 mm range
- No specific spa brands or systems are listed
