CMP - Cluster Jet Body Jet Socket Replacement - 23411-000-000

CMP – Cluster Jet Body Jet Socket Replacement

The CMP Cluster Jet body, part number 23411-000-000, is a replacement jet socket for all jets in the CMP Cluster Jet range. It has two ribbed-barb connections, one for water and one for air, so the jet draws in air through the air pipe by itself.

Compatibility of the CMP Cluster Jet body

This jet socket is made to take every jet from the CMP Cluster Jet range. If you are replacing a damaged or worn socket, check that your existing jets belong to this range before ordering.

Not sure whether it matches your installation? Contact us with the CMP part number found on your current socket and we will help you check.

Water and air connections

The socket has two ribbed-barb connections, each with its own job:

• one for a 3/4-inch water pipe
• one for a 3/8-inch air pipe

The nozzle inside the socket automatically sucks in air through the air pipe by the Venturi effect, so no separate air control is described for the socket itself.

Fitting and sealing the jet socket

To seal the jet properly, use a gasket between the socket and the outer surface of the pool. Between the jet and the inner surface of the pool, use silicone or hybrid sealant.

Fit the gasket and the sealant as described, as both surfaces need to be sealed for a tight installation.

Dimensions of the jet socket

Compare these measurements with your old socket before ordering:

• External diameter: 40 mm
• Internal diameter: 24 mm
• Overall length: 68 mm

The manufacturer part number for this replacement CMP Cluster Jet socket is 23411-000-000. Quote it if you need to confirm that you are ordering the right part.