Certikin - 1/2" F 90° Slip Tee for 1/2-Inch Pipe - GP012ET

Certikin – 1/2″ F 90° Slip Tee for 1/2-Inch Pipe

The Certikin GP012ET is a 1/2″ F 90° slip tee, an equal tee with three female fittings for 1/2-inch pipes. It is made from PVC-U plastic and has an inside diameter of 21 mm. Use it as a replacement or addition where a pipe run needs a T-shaped junction in 1/2-inch pipework.

Size and compatibility of the 1/2-inch slip tee

This tee is made for 1/2-inch pipe. The inside diameter is 21 mm, so that is the measurement to match against your existing pipework.

It is an equal tee, which means all three connections are the same size. All three are female fittings, so the tee has no reduced or differently sized outlets.

Design and material

The Certikin GP012ET is a 90° tee, so it gives a T-shaped junction in the pipe run. The main points are:

• Three female fittings, all for 1/2-inch pipe
• Equal tee: the same size on every connection
• Inside diameter of 21 mm
• Manufactured from PVC-U plastic

How to choose the right part

Pipe sizes are often quoted in inches in one place and in millimetres in another. If you are unsure which one applies to your pipework, our guide Confused by sizes in inches and millimeters? explains the difference. Measure carefully and compare the result with the 21 mm inside diameter given for this tee before you order.

This part is a tee, so it is meant for a point where the pipe splits or joins from the side. If you only need to join two pipes in a straight line, a straight connector 1/2″ is the type of part to look at instead.

Part number and ordering

The Certikin part number is GP012ET. Quote this number if you are comparing it with an existing fitting or looking for the same item again later.

Please check that the size and the shape of the junction match what your pipework needs. The tee has three equal female connections and is intended for 1/2-inch pipe only.