AstralPool - Sand Purge Drain Fitting 90° (Praga Filter) - 4404160107
AstralPool – Sand Purge Drain Fitting 90° (Praga Filter)
This is the genuine AstralPool Sand Purge 90° drain fitting (position 14 in the official Fluidra exploded view), designed as a direct replacement for the bottom sand and water discharge port on AstralPool Praga sand filters. It allows the filter tank to be drained and the filter medium to be changed without sand loss, keeping maintenance clean and straightforward.
Compatibility
This part fits the full AstralPool Praga filter range, including the current 1½” arm models rated at 2.5 kg/cm² (series 00687–00707 and 00694–00703) and the 4 kg/cm² models (series 00712–00724, 09209, 09210), spanning tank diameters from Ø 1050 mm up to Ø 2000 mm. Always cross-reference your filter’s model number against the official Fluidra exploded diagram (position 14) before ordering.
Why Genuine Matters
As an original Fluidra/AstralPool spare part, this fitting is manufactured to the precise tolerances of your Praga filter tank, ensuring a leak-free seal at the drain port. Aftermarket alternatives may not match thread pitch or body diameter, risking leaks or sand contamination of the pool.
Installation
The 90° orientation of the outlet simplifies pipework routing at the base of the filter. Fitting is straightforward for a competent pool technician: drain the filter, remove the old purge fitting, thread in the replacement and torque to the manufacturer’s specification. Always inspect the sealing surfaces and replace any associated O-ring or gasket at the same time.
Additional information
| Filter Compatibility: | AstralPool Praga Filter (2.5 kg/cm² and 4 kg/cm² models), tank diameters Ø 1050–2000 mm |
|---|---|
| Exploded View Position: | Position 14 |
| Outlet Angle: | 90° |
| Function: | Sand and water drain / purge port |
| Part Type: | Genuine OEM spare part |
| Filter Series: | 00687, 00688, 00689, 00694, 00696, 00702, 00703, 00707, 00712, 00713, 00714, 00719, 00720, 00724, 09209, 09210 |
| EAN: | 8420382105063 |
This spare part is suitable for:
-
AstralPool Praga Filter D1200-75MM 1,0M 4KG/CM2 - 00713
-
AstralPool Praga Filter D1050-90MM 1,0M 2,5KG/CM2 - 00707
-
AstralPool Praga Filter D1400-110MM 1,0M 2,5KG/CM2 - 00703
-
AstralPool Praga Filter D1200-90MM 1,0M 2,5KG/CM2 - 00702
-
AstralPool Praga Filter D1400-90MM 1,0M 2,5KG/CM2 - 00696
-
AstralPool Praga Filter D1050-75MM 1,0M 2,5KG/CM2 - 00694
-
AstralPool Praga Filter D1400-75MM 1,0M 2,5KG/CM2 - 00689
-
AstralPool Praga Filter D1200-75MM 1,0M 2,5KG/CM2 - 00688
-
AstralPool Praga Filter D1050-63MM 1,0M 2,5KG/CM2 - 00687