AstralPool - 1/2" Plug for Danubi Pump - 4401043406

AstralPool – 1/2″ Plug for Danubi Pump

This genuine AstralPool 1/2″ plug is a threaded blanking plug designed to seal unused or auxiliary ports on the Danubi pool pump. It keeps the pump body pressure-tight, preventing air ingress and water leakage at any open threaded port. Sourced directly from AstralPool/Fluidra, it is a like-for-like factory replacement for position 27 in the official Danubi exploded view.

Compatibility

This plug is designed specifically for the AstralPool Danubi Pump (model DNB1500SP-E-M). It corresponds to position 27 in the official Fluidra exploded view for that pump. Always verify your pump model before ordering, as other AstralPool pump models may require a different plug or fitting.

Why Genuine Matters

An ill-fitting or aftermarket plug can fail to seal correctly under pump operating pressure, leading to air leaks, loss of prime, and potential pump damage. This is a genuine AstralPool part manufactured to the exact thread specification and pressure rating of the original, ensuring a reliable, leak-free seal every time.

Installation

Thread the plug into the appropriate 1/2″ BSP port on the pump body by hand before tightening with a suitable wrench. Apply PTFE thread-seal tape for a water-tight fit. Ensure the pump is switched off and depressurised before replacing any fittings. If in doubt, consult a qualified pool technician.