Arctic - Rising Dragon 200gpm Black Anti-Vortex Suction Cover - 110662

Arctic – Rising Dragon 200gpm Black Anti-Vortex Suction Cover

The Rising Dragon suction cover, part number 110662 (also listed as JET-110662), is a black 200gpm anti-vortex replacement cover for Rising Dragon suction fittings. It is found on Arctic Spas hot tubs marketed since September 2003.

If your hot tub suction grille is cracked, damaged or missing, check the fitting type and the measurements below before ordering.

Compatibility of the Rising Dragon suction cover

This hot tub suction cover is made for Rising Dragon suction fittings. According to the specification, it can be found on Arctic Spas hot tubs that were marketed from September 2003 onwards.

It is a 200gpm anti-vortex cover in black. If your spa uses a different type of suction fitting, this cover is not the right replacement.

Dimensions and mounting

Measure your existing suction cover and compare it with these figures before you order:

• Outside diameter: 131 mm
• Inside diameter: 124 mm
• Grille height: 31 mm
• Mounting: with notches

The notched mounting is part of the design, so look at how your current cover is held in place. This helps you confirm that the replacement matches the fitting in your spa.

How to choose the right suction cover

Suction covers can look very similar from a distance, so do not rely on appearance alone. Start by confirming that your spa has Rising Dragon suction fittings, then compare the diameters, the grille height and the notched mounting with the figures above.

Also check the flow rating and colour. This cover is rated at 200gpm and is black. A cover with a different rating, colour or mounting style should not be treated as a direct match.

Part numbers

The Rising Dragon part number for this cover is 110662. It is also listed under the reference JET-110662. Use either number when you compare it with the part you are replacing or when you search for a matching replacement suction cover.