Aquasalis - VP 18 Variable-Speed Pool Pump, 2.4 HP - AQ-VP18
Aquasalis – VP 18 Variable-Speed Pool Pump, 2.4 HP
The Aquasalis VP 18 is a variable-speed pool pump of 2.4 HP, drawing up to 1,800 W and moving up to 40 m³/h at a maximum head of 22 m. Its permanent-magnet motor runs at any speed between 30 and 100 %, so it only works as hard as the moment asks.
Run slower, use less
A pool rarely needs its pump at full speed. Filtering at a lower speed for longer moves the same water with far less energy, and much more quietly. The VP lets you set any speed between 30 and 100 %, so the pump runs only as hard as the moment requires.
Set it once
Store four speeds on the control panel — for example a low speed for daily filtering, a higher one for backwashing or running the heat pump — and let the 24-hour timer switch between them. The display offers six languages.
A bigger pre-filter basket
The 4-litre pre-filter catches leaves and hair before they reach the pump, so it needs emptying less often. A removable rain cover over the drive is included.
Additional information
| Max. input power: | 1,800 W |
|---|---|
| Max. flow: | 40 m³/h |
| Max. head: | 22 m |
| Power: | 2.4 HP |
| Power supply: | 220–240 V, 50/60 Hz |
| Speed range: | 30–100 %, stepless |
| Speed presets: | 4 |
| Timer: | 24-hour cycle |
| Pre-filter: | 4 L |
| Max. suction height: | 6 m |
| Water temperature: | 5–50 °C |
| Ambient temperature: | Up to 40 °C |
| Water pH: | 6.5–8.5 |
| Pipe connection: | 63 mm (75 mm optional) |
| Dimensions: | 693 × 330 × 349 mm |
| Brand: | Aquasalis |
In details
- Permanent-magnet motor with stepless speed from 30 to 100 %
- Four programmable speed presets and a 24-hour timer
- Large 4-litre pre-filter basket, so it needs emptying less often
- Removable rain cover over the drive
- Running slower for longer moves the same water on far less energy, and much more quietly
- Supplied with unions for 63 mm pipe; 75 mm needs the optional set
- No separate manual or datasheet in Aquasalis livery yet