Aquasalis - SC 8 Salt Chlorinator, 8 g/h (10,000 h electrode) - AQ-SC8-10K

Aquasalis – SC 8 Salt Chlorinator, 8 g/h (10,000 h electrode)

The Aquasalis SC 8 produces 8 g/h of chlorine, enough for pools up to 40 m³. This version carries the 10,000-hour electrode. Controller and electrolysis cell sit in one inline unit that goes straight into the return line after the filter, on a 1½” / D50 PVC connection. Cell voltage is 24 V DC.

Built for small plant rooms

The SC combines the controller and the electrolysis cell in a single unit. Inlet and outlet sit on one axis, so it fits straight into the return line after the filter — no separate control box on the wall. The whole unit comes apart for cleaning or replacing the cell.

Control it at the pool or from your phone

Set the power level, daily operating time and polarity reversal on the touch panel, or remotely in the Smart Life app over Wi-Fi or Bluetooth. The app also shows water temperature, salinity status and alerts. One-touch boost runs the cell at full power for 24 hours, for example after a pool party or a heavy storm. Settings are kept after a power cut.

Watches the water for you

The SC checks salinity automatically before and after each run, and on demand with the salinity button. It also monitors:

• Water flow — an alarm when there is not enough flow through the cell
• Water temperature — too low or too high
• Salinity — too low or too high
• Electrode condition, current and voltage

Two electrode versions

Every model is available with a 7,000-hour or a 10,000-hour electrode. Regular polarity reversal limits scale on the titanium plates, which helps the electrode reach its rated life.