AquaFinesse - Spa Clean Biofilm Removal Tablet for Hot Tub Plumbing - PPS-10641
AquaFinesse – Spa Clean Biofilm Removal Tablet for Hot Tub Plumbing
AquaFinesse Spa Clean is a deep cleaning tablet for hot tubs and spas, made to remove biofilm from the plumbing and other places you cannot see. It has an environmentally friendly formula and is designed for the deep clean you carry out at your 3-monthly water change, when starting a new spa, or when switching from traditional sanitisers to AquaFinesse.
When to use Spa Clean in your hot tub
Biofilm forms from oil, grime and bacteria that find their way into the spa. Over time the bacteria bind it all together in a slimy film that can coat the inside of the pipework, which makes it hard to keep the water properly sanitised.
Consider a deep clean if you notice any of the following:
- Slime around the water line, skimmer or jets
- Unexplained green, black, brown or white flakes in the water
Spa Clean is suited to the 3-monthly water change, to treating a new spa, and to changing over from traditional sanitisers to AquaFinesse.
How to use the Spa Clean tablet
Follow these steps for a deep clean of the spa interior and pipework:
- Remove the filter and raise the chlorine level to between 3 and 5 ppm before you begin.
- Make sure all jets and air valves are set to the open position.
- Add the tablet to the basket above the removed filter, if possible in water over 32°C. Alternatively, dissolve it in a bucket of warm water first and then add it to the spa water.
- Run the pumps on full power for 20 minutes to get a good flow.
- Repeat the pump cycle at least 2 to 3 times during the treatment. The recommended treatment time is 6 to 12 hours, depending on how severe the problem is.
- When the treatment is finished, run the pumps before emptying the spa, then rinse thoroughly with fresh water.
- Refit the filter, refill with fresh water and add non-chlorine shock powder or Active Oxygen.
- Carry on with your usual water treatment.
What is supplied
This listing is for one Spa Clean tablet. No part number is given for this product, so please identify it by the AquaFinesse Spa Clean name.
Documentation
The manual and the safety data sheet for Spa Clean can be downloaded below on this product page.
Additional information
| Weight: | 0,10 kg |
|---|---|
| Brand: | AquaFinesse |
| Product: | Spa Clean |
| Product type: | Deep cleaning tablet |
| Purpose: | Biofilm removal |
| Quantity: | 1 tablet |
| Chlorine before use: | 3-5 ppm |
| Water temperature: | Over 32°C if possible |
| Treatment time: | 6-12 hours |
| Documentation: | Manual, safety data sheet |
In details
- Removes biofilm from plumbing and hidden areas
- Environmentally friendly formula
- Suitable for 3-monthly water changes and new spas
- Can be used when switching from traditional sanitisers to AquaFinesse
- Supplied as a single tablet
- Needs the chlorine level raised and a 6 to 12 hour treatment