AMP Light Power Cord for J&J WC-25 and WC-50 LED Controllers - PPS-10320
Shipping 1-3 weeks
Certified online store
Easy returns within 14 days
Looking for advice?
AMP Light Power Cord for J&J WC-25 and WC-50 LED Controllers
This AMP light power cord is a replacement lead for a hot tub or spa LED lighting set-up. It connects a J&J WC-25 or WC-50 LED controller to the control box. It suits all control systems that use AMP plugs, including Balboa and Gecko systems, and it is distinguished by red spade connectors on the controller side and AMP pins on the motherboard side.
Compatibility with AMP plug control systems
The cord is intended for spa control systems that use AMP plugs. This includes all Balboa and Gecko systems. The same type of wiring may also be suitable for control systems from other brands, so compare the connection on your own control box before you order.
On the lighting side, the cord is made for the J&J WC-25 and WC-50 LED controllers. If you need a replacement lead between one of these controllers and your control box, this is the type of cable to look for.
Connections and wiring
Each end of the cord has a different connector, so it is easy to see which way round it goes:
- Two female red spade crimp connectors for the LED controller.
- Two male AMP pins for connection to the motherboard of the control system.
Before ordering, look at the plug or terminals on your current light lead and on the control box. If your system uses AMP plugs for the lighting output and your controller takes spade connectors, the cord matches that wiring.
How to choose the right light power cord
Because this cord is not tied to a single spa brand, the connector type matters more than the system name. Check the following points:
- Your LED controller is a J&J WC-25 or WC-50.
- Your control box connects the light output with AMP pins.
- The controller connection takes female spade crimp connectors.
If all three apply, this replacement power cord is the right kind of part for your spa lighting.
Fitting and dimensions
The cord has a length of 100 cm. Measure the route between the LED controller and the control box inside your spa cabinet to be sure that one metre is long enough for your installation.
Please note that this item is the power cord only. The LED controller and the lights themselves are sold separately.
Additional information
| Weight: | 0,30 kg |
|---|---|
| Product type: | LED light power cord |
| Brand: | Generic (unbranded) |
| Compatible controllers: | J&J WC-25, WC-50 |
| Compatible systems: | Systems with AMP plugs, incl. Balboa and Gecko |
| Controller connection: | 2 female red spade crimp connectors |
| Motherboard connection: | 2 male AMP pins |
| Length: | 100 cm |
In details
- Fits all control systems that use AMP plugs, including Balboa and Gecko
- Suits J&J WC-25 and WC-50 LED controllers
- Female red spade connectors and male AMP pins ready for connection
- 100 cm cord length
- Only suitable for systems that use AMP plugs and spade connections
- LED controller and lights are not included
