90° F/F 3/4" Elbow for MSpa Delight Inflatable Spas - PPS-10448
90° F/F 3/4″ Elbow for MSpa Delight Inflatable Spas
This 90° female/female 3/4″ elbow is a replacement connector for MSpa Delight series inflatable spas, where it joins the filtration pump and the heater on the engine block. It has an inside diameter of 27 mm (3/4″) and is listed under the MSpa part number B9301223.
If you need a replacement MSpa Delight elbow fitting, compare the size and part number below with your existing connector before you order.
Compatibility with MSpa Delight engine blocks
This elbow is intended for the engine blocks of the MSpa Delight series of inflatable spas. Its job is to make the right-angle connection between the filtration pump and the heater, so it forms part of the water path inside the engine block.
The source information does not list any other spa series for this part. If your inflatable spa is not from the Delight series, do not assume that the elbow will fit.
Dimensions and connection
The key details of this 90° elbow are:
- Shape: 90° elbow
- Connection type: female/female (F/F)
- Nominal size: 3/4″
- Inside diameter: 27 mm (3/4″)
Because both ends are female, the elbow is designed to fit over the matching connections on either side rather than inside them. Measure the connection points on your engine block if you are unsure about the size.
How to choose the right replacement elbow
Start with the part number. The MSpa reference for this elbow is B9301223, so look for the same number on your old part, on any paperwork you have kept, or in your spa’s parts list.
Then check the following before ordering:
- Your spa belongs to the MSpa Delight series.
- The elbow in your engine block connects the filtration pump and the heater.
- The angle is 90° and the inside diameter is 27 mm (3/4″).
An elbow with a different angle, size or connection type will not be a like-for-like replacement, so it is worth taking a moment to compare these details with the worn or damaged part.
Part numbers
This elbow is referenced as MSpa B9301223. Use this number when you search for a replacement or compare it with other listings, so that you are sure you are looking at the same MSpa Delight engine block connector.
Additional information
| Weight: | 1,00 kg |
|---|---|
| Product type: | 90° elbow fitting |
| Connection: | Female/female (F/F) |
| Nominal size: | 3/4" |
| Inside diameter: | 27 mm (3/4") |
| Compatible systems: | MSpa Delight series engine blocks |
| Spa type: | Inflatable spa |
| Function: | Joins filtration pump and heater |
| MSpa part number: | B9301223 |
In details
- 90° F/F elbow for the MSpa Delight engine block
- Connects the filtration pump and the heater
- Inside diameter 27 mm (3/4")
- Matches MSpa part number B9301223
- Intended for MSpa Delight series inflatable spas only
- Sold as a single elbow connector, not a full plumbing kit